Page 1
WASHING MACHINE User’s Manual FEATURES SAFETY INSTRUCTIONS DESCRIPTION OF PARTS CONTROL PANEL WASHING PROCEDURE Fuzzy(Digital) course Blanket course Super clean course Speedy course Wool course Delay start course Silver wash course MANUAL FUNCTIONS INSTALLATION & MAINTENANCE Environment Levelling Connecting the water supply hose Assembling the rat protection panel In case of pump-drained washer Connecting the drain hose...
FEATURES THE SILVER WASH SYSTEM • This is a wash control system that enables to kill bacteria hidden in the cloth during the wash or rinse, to protect human skin from harmful bacteria through the antibiotic coating by SILVER WASH, and to real- ize a pleasant, healthy sanitization.
SAFETY INSTRUCTIONS Please note that the following precautions for safety intend to prevent unpredictable danger and damage by helping the proper use in safety. When using hot water in washing, please make sure that the water should not exceed 50˚C. •...
CONTROL PANEL For more details, see control panel of your washing machine. POWER BUTTON POWER Press this button once to operate. Press once again to turn the power off. START/ START/HOLD BUTTON HOLD Use to pause and restart the operation. To change the washing procedure during operation, press this button to stop, and once again to restart after changing the procedure.
WASHING PROCEDURE Before starting washing, check the following; Put the laundry into the washer and add detergent, too. Connect the water supply hose to the water tap. Leave a tap Be careful not to overload. Use right detergent open. Plug the power cord in. Make sure to lay down the for the fabrics you are washing.
MANUAL FUNCTIONS Each washing course changes manually. Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash - Start/Hold button SOAK FUNCTION (Including WASH, RINSE, SPIN) Press the POWER button. Select the course(Press the course button). FUZZY(DIGITAL), BLANKET, SUPER CLEAN, SPEEDY, WOOL START/ FUNCTION...
Page 8
MANUAL FUNCTIONS When SILVER WASH is selected, it performs as described below in each press of the Function button. By default, the cycle sequence of WASH, RINSE, SPIN is adopted for this course. WASH + SPIN + SILVER WASH Press the FUNCTION button once. Press the START/HOLD button once.
INSTALLATION & MAINTENANCE The User’s Manual is for common use. Make use of the User’s Manual depending upon your washing machine model. ENVIRONMENT Never install the washer near water. Leave some space Do not place the washer in steamy rooms or where the Maintain at least 10cm between the washer and the wall.
ASSEMBLING THE RAT PROTECTION PANEL 2.If you have difficulty 1.Insert the rat inserting the panel protection panel lift up the washer a to the assembling little and insert it hole on front side to the end. IN CASE OF PUMP-DRAINED WASHER Take out the cap-hose and Be sure to join tightly the drain hose into Be sure to join tightly the drain...
WATER SUPPLY CONNECTOR FILTER inlet water valve 1.Pull out the filter and wash well. 2. Pull in the filter and connect 3. Check if there is a leakage. the hose to the inlet water Note to tighten up the valve tightly. connector.
TROUBLESHOOTING Washing machine won't work Spinning does not work Is the water tap opened? Is the laundry spread out evenly Is the washer plugged in? in the washer? Is the power cut off? Is the washer set on a sturdy Is there enough water? flat surface? Water is not supplied...
IN CASE THE NEED FOR SERVICING ARISES. If any problem occurs with your products,do not hestitate to call any nearby. Name, address, telephone number is required. SPECIFICATIONS MAXIMUM 75 l 426W WASH POWER HIGH 62 l CONSUMPTION STANDARD 53 l 270W WATER LEVEL SPIN...