Samsung WA10RAQ3IW/YGG Service Manual page 16

Disassembly Procedure
◆ Removing the Motor
1) Remove the Back Cover.
2) Lay down the Washing Machine with the rear side facing the
floor.
3) Pull out the Sound Absorption Panel.
4) Remove the Wire Housing.
5) Remove the V Belt.
6) Remove the two Bolts fastening the Motor.
7) Remove the Motor Pulley.
8) Pull out the Motor
◆ Removing the Drain Motor
1) Lay down the Washing Machine with the rear side facing the
floor.
2) Pull out the Lead Wire Terminal.
3) Remove the Bolt.
4) Remove the Drain Motor Wire from the Link.
5) Lift out the Drain Motor
◆ Removing the Shaft Assembly
1) Remove the two Screws fixing the Top Cover, and lift up the
Top Cover gently tilt the Top Cover back to expose the Tub
Cover.
2) Remove the four Screws fixing the Tub Cover.
3) Remove the Bolt fixing the Pulsator.
4) Remove the Spin Nut fixing the flange Shaft and the Shaft and
pull out the Spin Basket.
Disassemble the Spin Nut in a counterclockwise direction.
5) Lay down the Washing Machine with the rear side facing the
floor.
6) Remove the two Bolts fixing the Saddle.
7) Remove the four Bolts fixing the Shaft using the Box and take
out the Shaft Assembly.
◆ Removing the Pump Assy
1) Remove the Back Cover.
2) Remove the Lead Wire Terminal and the Earth Wire.
3) Remove the Two Hoses.
4) Remove the 2screws which fix the filter.
5) Lay down the Washer with the right side facing the Floor.
6) Remove the 2 Screws which fix the pump.
7) Lift out the Pump.
Caution
open
SCREWS
15
Illustration Remarks
close
SCREWS