Advertisement
6-2 Disassembly
Disassembly Procedure
◆ Removing the Top cover and PCB Assembly
1) Remove screw cover and screw A.
2) Loose 5 screws for fastening the PCB-Assembly.
3) Take out the PCB-Assembly.
4) Remove 2 screws at the front of the top-cover.
5) Remove 2 screws fixing the parts in back of the top-cover.
6) Remove the top-cover while pushing it in the direction of the
front at the same time lift up quietly the rear side.
7) Reverse the top cover.
◆ Removing the Ag kit, Pressure-Sensor, Water-Valve,
Checker Assembly, and Transformer
1) Remove two Screws fixing the Top-Cover and the Cover T.C.
2) Lift up the Cover T.C. while pushing it in the direction of the
arrow.
◆ Pressure Sensor
1) Pull out the Lead Wire Terminal of the Pressure Sensor.
2) Remove the Pressure Sensor.
3) Pull out the Air Hose.
◆ Ag kit
1) Remove two screws fixing the kit.
2) Pull out the teminalns.
◆ Water Valve
1) Pull out the Lead Wire Terminals.
2) Remove the Water valve while pushing it in the direction of
the arrow.
◆ Checker
1) Pull out the Lead Wire Terminals.
2) Remove the two Screws.
3) Lift out the Checker.
◆ Wire Harness
1) Pull out the Lead Wire Terminals from the PCB.
2) Pull out the Lead Wire Terminals from the parts in back of the
Top Cover.
3) Remove the Wire Harness.
◆ Transformer
1) Transformer is built in the PCB Assembly.
14
Illustration
A
Hide quick links:
Advertisement
