Table of Contents
Advertisement
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your Soundbar speakers.
What you need
•
A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 4.2 + EDR.
•
The maximum operational range between
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press the
button repeatedly on the unit
or on the remote control to switch the
Soundbar to Bluetooth mode.
» NO BT is displayed on the display
panel.
2
On the Bluetooth device, switch on
Bluetooth, search for and select
Philips TAB8905 to start connection
(see the user manual of the Bluetooth
device on how to enable Bluetooth).
3
Wait until you hear the voice prompt
from the Soundbar.
» If the successfully connected, BT is
displayed on the display panel.
4
Select and play audio files or music on
your Bluetooth device.
•
During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
•
If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
or press
to pause/resume play.
5
To exit Bluetooth, select other source.
•
When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
/
to skip to a track,
Note
•
The music streaming may be interrupted by obstacles
between the device and Soundbar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
•
If you want to connect your Soundbar with another
Bluetooth device, press and hold
control to disconnect the currently connected
Bluetooth device.
AUX / OPTICAL / HDMI
Operation
Ensure that the unit is connected to the TV or
audio device.
1
Press the
button repeatedly on the unit
or on the remote control to select the
AUX, OPTICAL, HDMI ARC, HDMI 1,
HDMI 2 mode.
2
Operate your audio device directly for
playback features.
3
Press the VOL +/– buttons to adjust the
volume to your desired level.
Tip
•
While in OPTICAL/HDMI ARC mode, if there's no
sound output from the unit and the status Indicator
flashes, you may need to activate PCM or Dolby Digital
Signal output on your source device (e.g. TV, DVD or
Blu-ray player).
•
The unit may not be able to decode all digital audio
formats from the input source. In this case, the unit
will mute. This is NOT a defect. Ensure that the audio
setting of the input source (e.g. TV, game console, DVD
player, etc.) is set to PCM or Dolby Digital (Refer to
the user manual of the input source device for its audio
setting details) with HDMI 1 / HDMI 2 / HDMI ARC /
optical input.
•
In HDMI mode, when the DOLBY ATMOS audio
format is entered, the Soundbar display shows DOLBY
ATMOS.
•
When the DOLBY DIGITAL audio format is entered,
the Soundbar display shows DOLBY AUDIO.
•
When the PCM audio format is entered, the Soundbar
display shows PCM AUDIO.
•
When entering non-PCM or DOLBY DIGITAL audio
formats, if there's no sound output from the unit and
the display show NO SUPPORT.
on the remote
15
Advertisement
Table of Contents
