Table of Contents
Advertisement
Adjust the Volume
When adjusting the volume of the soundbar
and subwoofer, the status indicator will
increase / decrease the amount of light.
According to the corresponding light
display / blinking (Fig), determine the
current volume level of the soundbar and
subwoofer.
Adjust the Soundbar's Volume
1
+/- (Volume) to increase or
Press
decrease the soundbar's volume level.
To mute sound, press
To restore the sound, press
(Mute) again or press Vol+/Vol-
(Volume).
Adjust the Subwoofer's Volume
1
+/- (subwoofer) to increase or
Press
decrease the subwoofer's volume level.
Bluetooth Operation
Through Bluetooth, connect the Soundbar
with your Bluetooth device (such as an
iPad, iPhone, iPod touch, Android phone,
or laptop), and then you can listen to the
audio les stored on the device through your
Soundbar speakers.
What you need
A Bluetooth device which supports
Bluetooth pro le A2DP, AVRCP and with
Bluetooth version as 4.2 + EDR.
1
2
3
4
(Mute).
5
The maximum operational range
between the Soundbar and a Bluetooth
device is approximately 10 meters
(30 feet).
Press the
button repeatedly on the
unit or press BT/Pair button on the
remote control to switch the Soundbar
to Bluetooth mode.
The BT indicator will blink.
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
TAB6405 to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
During connection, the BT indicator
will blink.
Wait until you hear voice prompt from
the Soundbar.
If the successfully connected, the BT
indicator will light up solidly.
Select and play audio les or music on
your Bluetooth device.
During play, if a call is coming, music
play is paused. Play resumes when
the call ends.
If your Bluetooth device supports
AVRCP pro le, on the remote control
you can press
track, or press
play.
To exit Bluetooth, you can:
Switch the unit to another source.
Disable the function from your
Bluetooth device. Or place your
Bluetooth device out of the
maximum operational range.
The Bluetooth device will be
disconnected from the unit after the
voice prompt.
Press and hold the BT/Pair button
on the remote control or the
button on the unit.
/
to skip to a
to pause/resume
13
Advertisement
Table of Contents
