5 Wall mount
Note
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Before wall mounting, make sure the wall can support
the weight of your Soundbar.
•
Before wall mount, you need not remove the rubber
feet at the bottom of the Soundbar, otherwise the
rubber feet cannot be fixed back.
•
Depending on the type of wall mounting your
Soundbar, make sure that you use screws of a suitable
length and diameter.
•
Please check whether the USB port on the back of the
Soundbar is connected to a USB device. If it is found
that the connected USB device affects the wall-mount,
you need to use another USB device of the appropriate
size.
Screw length/diameter
3.5-4mm
> 25mm
Suggested wall mounting height
You are recommended to install the TV first
before wall mounting the soundbar. With a
TV preinstalled, wall mount the soundbar
50mm/2.0'' in distance from the bottom of the
TV.
1
Drill 2 parallel holes (Ø 3-8mm each
according to wall type) on the wall. The
distance between the holes should be
1076 mm / 42".
» Secure the dowels and screws in the
holes.
2
Remove the screws (x4) from the main
unit.
4mm
» Attach the wall brackets (x2) to the
main unit with the screws removed
from the main unit.
3
Hang the Soundbar on the fastening
screws.
/ 2 . 0 "
m m
~ 5 0
1
4 2 "
m /
6 m
1 0 7
3
2
3.5-4mm/0.14"-0.16"
4mm/
0.16"
>25mm/0.98"
17