Computer Input; Input Source Selection - Canon LV-X4 LV-7230 Owner's Manual

Computer Input

Input Source Selection

Direct Operation
Choose either Computer 1 or Computer 2 by pressing the INPUT
button on the top control or press the COMPUTER button on the
remote control unit.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1 Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Input Menu icon.
2
Press the Point
either Computer 1 or Computer 2, and then press the SET
button.
3 After the Source Select Menu appears for Computer 1,
move the pointer to RGB and then press the SET button.
When the input source is analog coming from a
RGB
computer through the RGB IN-1/ COMPONENT
IN terminal, select RGB.
See "Selecting Input Source (Component / RGB-
Component
Scart 21-pin )" on p35.
See "Selecting Input Source (Component / RGB-
RGB (Scart)
Scart 21-pin )" on p35.
✔
Note:
Computer 2 is not displayed when the RGB IN-2/ RGB OUT terminal is used as
Monitor out. (p43)
26
button to move the red frame
7 8
d d button to move the red arrow pointer to
INPUT button
Computer 1
✳
Computer 2
Video
COMPUTER button
Computer 1
✳
Computer 2
✳ See Note on the bottom of this page.
Input Menu icon
Input Menu
Move the pointer (red
arrow) to Computer 1
and press the SET
button.
Computer
1
Source Select Menu
Move the pointer to RGB and
press the SET button.
Input Menu
Move the pointer (red
arrow) to Computer 2
and press the SET
button.