Remote Control Unit; Pointer Function; Wireless Mouse Operation - Canon LV-X4 LV-7230 Owner's Manual

Remote Control Unit

q
w
e
r
t
y
u
POINTER
i
o
!0
!1
!2
!3
q
L-CLICK button
Acts as left click for wireless mouse operation. (p12)
w
SIGNAL EMISSION indicator
This indicator lights red while a signal is being sent from the remote control unit to
the projector.
e
KEYSTONE button
Corrects keystone distortion. (p24, 41)
r
AUTO PC button
Operates the Auto PC adjustment function. (p28)
t
COMPUTER button
Selects input source (COMPUTER 1 or COMPUTER 2). (p26)
y
POINT (e e d d 7 8) button
Selects an item or adjusts value in the On-Screen Menu. These are also used to pan
the image in the Digital zoom + mode. (p33)
Point 7 8 button are also used as VOL+/- buttons. (p25)
u
PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation. (p12)
i
SET button
Executes the item selected, or to expand or compress image in the Digital zoom +/-
mode. (p33)
o
PAGE UP/DOWN button
Turns pages; the Up button to the previous page and the Down button to the next
page for an image from a computer. Connect the projector and your computer with
a USB cable before use. (p17.)
!4
!0
POINTER button
!5
Activates the Pointer function of the projector. (p12)
!1
FREEZE button
Freezes the projected picture. (p24)
!2
IMAGE button
Selects image levels.(p31, 37)
3
!
M UTE button
Mutes sound. (p25)
4
!
POWER button
Turns the projector on or off. (p20,21)
!6
!5
VIDEO button
!7
Selects input source (VIDEO). (p34)
!6
MENU button
!8
Opens or closes the On-Screen Menu. (p22)
!9
!7
D.ZOOM button
@0
Selects the Digital zoom +/– mode and resize the image. (p33)
@1
!8
NO SHOW button
Turns the picture into black image. (p25)
9
!
R-CLICK button
Acts as right click for wireless mouse operation. (p12)
@0
P-TIMER button
Operates P-Timer function. (p25)
@1
RESET/ON/ALL-OFF switch
When using the remote control unit, set this switch to "ON." Set it to "ALL OFF"
when it is not used for energy saving. Slide this switch to the "RESET" to initialize
the remote control code. (p13)
Part Names and Functions
11