Table of Contents
Advertisement
Progressive
Interlaced video signal can be displayed in a progressive picture.
Off . . . .Not activated.
L1 . . . . .Select "L1" for an active picture.
L2 . . . . .Select "L2" for a still picture.
Film
This function is effective on 3:2 pulldown video source. With this
function On, the projector reproduces pictures faithful to the
original film quality.
Reset
Resets all adjustment to their previous levels.
Store
To store the adjustment data, move the red frame pointer to the Store
icon and press the SET button. The message "OK?" will appear.
Select [Yes] to store the adjustment data.
To select this manual adjustment, select Custom by pressing the
IMAGE button or through the Image Select Menu (p37).
Quit
Closes the Image Adjust Menu.
✔
Note:
• Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is
selected.
• Film can only be activated in any state shown below.
1. When selecting NTSC, NTSC4.43 PAL-M or 480i in the AV System Menu (p36).
2. When selecting Auto and signal is NTSC, NTSC4.43, PAL-M(Composite) or
480i(Component) in the AV System Menu (p36).
• 3:2 Pulldown or Telecine transfer is the process of changing images from film mode
to video mode. While film runs at 24 frames per second (fps), NTSC television
signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded
up to 30fps and transferred using a proper field pattern to get the best film-like
images.
"OK?" message
Move the pointer to
[Yes] and then press
the SET button.
Store icon
Video Input
39
Advertisement
Table of Contents
