Auto Pc Adjustment - Canon LV-X4 LV-7230 Owner's Manual

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to
your computer. Auto PC Adjustment function can be operated as follows.
Auto PC Adj.
1
Press the MENU button to display the On-Screen Menu.
Press the Point
PC Adjust Menu icon.
2
Press the Point
Auto PC Adj. icon and then press the SET button twice.
This Auto PC Adjustment can be also executed by pressing
the Auto PC button on the remote control unit.
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector. Once parameters are memorized, the
setting can be done just by selecting Mode in the PC System
Menu (p27). See "Store" on page 30.
✔
Note:
• Fine sync, Total dots and Picture Position of some computers can not be fully
adjusted with this Auto PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are required. (p29,30)
• The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i,
or 1080i is selected in the PC System Menu.
28
button to move the red frame pointer to
7 8
d button to move the red frame pointer to
PC Adjust Menu
Move the red frame pointer to
the Auto PC Adj. icon and
press the SET button.
PC Adjust Menu icon