Clearing The Memory - Furuno MU-120C Operator's Manual

5.3 Clearing the Memory

You may want to clear the memory to start afresh with default settings. You can do this as
follows:
1. Press the [MENU] key to show the main menu.
2. Press the [►] keys to open the SYSTEM menu.
3. Select DEFAULT RESET by arrow keys.
4. Press the [►] key to select YES.
RGB1 RGB2 DVI VIDEO1 VIDEO2 VIDEO3 OSD
INFRARED REMOTE
DEFAULT RESET
INFORMATION
RGB1 : RESOLUTION: 1280x1024 fH: 80KHZ fV: 75HZ
RGB2 : RESOLUTION: 640x480 fH: 31KHZ fV: 60HZ
DVI : NO SIGNAL
VIDEO1 : NTSC
VIDEO2 : PAL
VIDEO3 : NO SIGNAL
PROGRAM NO.: ****************
5. Press the [►] key again to select "reset".
A
YES
All custom Settings will be lost.
←key: cancel →key: reset
SYSTEM menu
20