Product Overview; Operation; Controls - Exmark VIKING 408 Operator's Manual

Product Overview

Figure 3
1. ECS Handles

2. Controls

g238873
3. Fuel Cap
4. Blade Spacers

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.
Controls
Note: Become familiar with all the controls before
starting the engine and operating the machine.
Operator Presence Control (OPC)
Levers
Located on the upper handle assembly directly above
the handle grips.
When these levers are depressed, the OPC system
senses that the operator is in the normal operator's
position. When the levers are released, the OPC
system senses that the operator has moved from the
normal operating position and the engine must begin
shutdown if either the speed control lever is not in the
neutral position or the PTO is engaged (see Figure 4).
Left ECS Handle Shown
1. Neutral Lock Latch/Park Brake Latch
2. Drive Lever
3. Handle grip
4. OPC Lever
13
Operation
Figure 4
g217809