Advertisement
Assembly Instructions:
(7) 042025
1/4-20 x 3/8
(2) 042021
THMS
Corner Brackets
(1) 042019
(1) 042139
Leg Bracket
Drill template
(1) 042110
(4) 021605
2" x 2" x 1" Shim
#10 x 1-3/4 PHSM
These are used with 48" 60" and 72" desks
Before you begin, please make sure all parts and proper quantities are included. Any parts damaged during shipment must be
reported within 15 days of receipt. To report information regarding damages or if you have any questions, please call 1-800-235-
1262.
Corner Bracket
Locknut
Figure 1
1. ASSEMBLING & ADJUSTING CPU SLING
A. Determine the height and width required for your CPU.
B. Adjust the CPU Sling to the height and width of your CPU using the three adjustment holes and attach the
corner brackets to the CPU sling using the 1/4-20 x 3/8" Truss Head Machine screws and 1/4-20 Locknuts as
shown in Figure 1. The screws install from the inside with the locknuts on the outside. Note the positions of the
corner brackets for the top and bottom sides of the CPU sling (Figure 1A.)
(4) 026017
(6) 041943
1/4-20 x 1/2
1/4-20 Locknut
PHMS
(2) 044890
(4) 026057
1 x .275 ID x .5
#10 x 3/4 PHSM
OD Nylon Spacer
(4) 026547
1/4-20 x 1-1/2 PHMS
1/4-20 x 3/8" THMS
Corner Bracket
Adjustable CPU Sling
#95500
Tools Required:
Phillips head screwdriver
7/16" wrench
Drill with an 1/8" bit (for desks without threaded inserts
Bottom
)
Top Side
Figure 1A
042023XR9 Page 1 of 2
Advertisement
Table of Contents
Related Manuals for Spectrum 95500
Summary of Contents for Spectrum 95500
- Page 1 (4) 026057 Leg Bracket 1 x .275 ID x .5 Drill template #10 x 3/4 PHSM OD Nylon Spacer Adjustable CPU Sling #95500 Tools Required: (4) 026547 (1) 042110 (4) 021605 Phillips head screwdriver 1/4-20 x 1-1/2 PHMS 2" x 2" x 1" Shim #10 x 1-3/4 PHSM 7/16"...
- Page 2 2. ATTACHING SLING TO DESKS WITH THREADED INSERTS Note: If desk does not have threaded inserts, skip to step #3 1/4-20 x 1-1/2" 1/4-20 x 1/2" PHM Screw PHM Screw Nylon Spacer Shim Support Brace Figure 2 Figure 2A Insert holes DESKS WITHOUT SUPPORT BRACE DESKS WITH SUPPORT BRACE A.
Need help?
Do you have a question about the 95500 and is the answer not in the manual?
Questions and answers