Spectrum 95506 Assembly Instructions

Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(1) 042342
17-3/4" Slide
(1) 044321 Parts bag
(1) Slide guard
(1) Rubber bumper
(8) #8 x 5/8" PHSM
1. Attach micro-arm bracket to keyboard tray
1. Align the micro-arm bracket with the 6 pre-drilled holes in the center of
the keyboard tray and attach with (6) #8 x 5/8" PHSM screws. Figure 1.
2. Tighten screws securely.
(1) 044217
Micro-arm
bracket
(1) 043517
Keyboard tray
Note: The spacers and longer screws are used between the slide and
worksurface only on worksurfaces with a 1" protruding support bar.
(8) 026070
#8 x 1-3/4"
PHSM
#8 x 5/8" PHSM
screws (6 required)
Micro Arm Keyboard Tray
95506
(1) 044480 (5) 043878
Spacer block Nylon spacer
1" x .375" OD
x .171" ID
Micro-arm bracket
Keyboard tray
Phillips
screwdriver
Figure 1
043548R8 Page 1 of 2