Propeller Protector Instruction - FMS Eazy RC 540mm PA-18 Super Cub Instruction Manual

Front landing gear assembly
1.Insert the front landing gear into the
slots as shown.
Rear landing gear assembly
1.Insert the rear landing gear into the
slot as shown.
Battery installation
1.Remove the battery cover at the bottom of
fuselage. Connect the full charged battery to
the receiver， then stick the battery into the
cabin， making sure the battery is well
secured. Reinstall the battery cover.

Propeller Protector Instruction

The propeller protector can automatically
eject the propeller when the aircraft encoun-
ters an unconventional landing, effectively
preventing the electronic components from
over current. To install the propeller back to
the base, insert the upper part centerly
through the motor shaft, and hear a slight"-
click"sound, indicating it is secured in place.
Note: Insert the upper part centerly through
the motor shaft, and hear a slight"click"-
sound, indicating it is secured in place.
07
EN