Kit Contents; Charging Instruction; Setup Instruction - FMS Eazy RC 540mm PA-18 Super Cub Instruction Manual

Kit contents

Before assembly, please inspect the contents of the kit. The photo below details the contents of
the kit with labels. If any parts are missing or defective, please identify the name or part number
(refer to the spare parts list near the end of the manual) then contact your local shop or email us:
support@fmsmodel.com.
A.
D.
A: Propeller set
B: Fuselage

Charging Instruction

1.Unplug the battery from your plane.
2.Carefully plug the charger into the USB
port on your computer or USB adapter.
3.Connect battery into the charger.
4.The charging process takes about 3.5
hours.For safety reasons, never charge
the battery for longer than 4 hours.
5. While charging, the red LED indicator will
be constant on.When the charging is
finished, the red LED will be off.

Setup Instruction

1.Install 4AA batteries(not included) in the
transmitter.
B.
E.
C: Main wing
D: Supporting bar set
Transmitter assembly
C.
F.
E: Pushrod
F: Front landing gear
05
G.
G: Rear landing gear
EN