Maintenance/Customer Service - Siemens DG30035E Installation And Operating Instructions Manual

Cleaning
■
Clean externally with a mild cleaning agent. Do not use
aggressive or abrasive detergents!
Rated capacity
Rated voltage
Rated output DGxxx35E
Rated output DGxxx35R
Rated output DGxxx35P
Rated current DGxxx35E
Rated current DGxxx35R
Rated current DGxxx35P
Fuse protection
Protection type/class
Rated over-pressure DGxxx35E
Rated over-pressure DGxxx35R
Rated over-pressure DGxxx35P
Cold and warm water connection
Corrosion prevention
Warm water temperature range
Frost protection
Insulation thickness
Stand-by power consumption
at 65 °C
Mixed water quantities at 40 °C
(15 °C/65 °C)
Heating time (inlet 12 °C -> 60 °C)
DGxxx35E
DGxxx35R/DGxxx35P
Weight [filled]
Dimensions (H x W x D)
GB

Maintenance/Customer Service

■
Repairs and other maintenance work may only be
carried out by one of our authorized customer service
representatives in order to avoid potential sources of
danger.
■
When you contact customer service, please quote the E
and FD numbers on your appliance (Fig. A).
■
The first inspection must be carried out no later than 2
years subsequent to initial startup of the appliance. This
involves inspection of the protection anode which may
need to be replaced, and the appliance may need to be
cleaned and descaled. The customer service will suggest
the next inspection date for a service.
■
The power supply and the water supply must be shut off
before all work on the appliance.
T e c h n i c a l d a t a
[l] 30
[V]
[W]
[A]
[A]
[Mpa]
[°C]
[°C]
[mm] 45
[kWh/d] 0.55
[l] 54
[min] 68
51
[kg] 49
[cm] 55 x 42 x 40
50 80
220–240 (~ 50Hz)
1500
2000
2000
6.5
8.7
8.7
10
IP24D
0.9
0.9
0.6
G 1/2"
Magnesium protection anode
approx. 35–75
approx. 10
40
0.7 0.9
90 144
114 182
85 137
70 107
62 x 46 x 44 89 x 46 x 44
100
1.1
180
228
171
131
107 x 46 x 44
11