Registering Tracks Or Groups As A New Group (Group Setting) - Sony MZ-B100 Operating Instructions (primary manual) Operating Instructions Manual

z
You can also use the SPEED CONTROL dial to
select and then enter the menu. Turn the dial
(instead of ./>) to show the menu items
one by one and press the dial (instead of EDIT/
ENTER) to enter the selected menu.
Notes
• "LP:" has been added at the beginning of the
track name of the track recorded in MDLP
mode.
• When the recording is stopped while labeling
a track or a disc during recording, or when the
playback moves on to the next track while
labeling a track, the input at that point is
entered automatically.
• When recording through the built-in
microphones, the sound of the recorder
operations, such as the pressing of buttons,
will also be recorded. To avoid this, it is
recommended to label a disc or a track after
completing the recording.
• You cannot relabel parametrized MDs or label
MDs that have not been recorded.
• The recorder is able to display, but cannot
label using Japanese "Katakana" characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device.
36
-GB
Registering tracks or
groups as a new group
(Group setting)
Do the following procedure to register
tracks (or groups). A series of tracks (or
groups) can be registered by selecting the
starting and ending tracks (or groups).
The tracks (or groups) must, however, be
sequential. If the desired tracks (or
groups) are not consecutive, you must
move them to make them consecutive
before you can register them ("Moving
recorded tracks", page 38). This function
can be used at any time, whether group
mode is on or off.
1 2 3 4 5 6 7 8 9
Making a new
group with
tracks 1 to 3.
Group
1 2 3 4 5 6 7 8 9
• Registration of non-consecutive tracks
is not possible (for example, the 1, 3, 2,
4, 3, 5, 6, 6, 8 and then 9).
• Tracks always appear according to their
order on the disc, not their order within
the group (even when group mode is
on).
./>
1
While the recorder is stopped, press
EDIT/ENTER.
Group
Group
Making a new group
with 2 groups.
Group
EDIT/
ENTER