Adjusting Treble Or Bass (Digital Sound Preset); Selecting The Sound Quality; Adjusting The Sound Quality - Sony MZ-R410 Operating Instructions Manual

Adjusting treble or bass
(Digital Sound Preset)
You can adjust the treble and bass to suit
your taste. The player can store two sets
of treble-bass adjustments, which can
then be selected later during playback.
>, .

Selecting the sound quality

Factory settings
Factory settings of the Digital Sound
Preset are as follows:
• "SOUND1": bass +1, treble ±0
• "SOUND2": bass +3, treble ±0
1
Press MENU.
2
Press > or . repeatedly until
"S-SEL" flashes in the display, and
then press ENTER.
3
Press > or . repeatedly until
"SOUND1" or "SOUND2" flashes in
the display, and then press ENTER.
To cancel Digital Sound Preset
Select "OFF" in step 3.
32

Adjusting the sound quality

You can change the preset sound quality.
To change the preset sound quality, select
"SOUND1" or "SOUND2", the one you
want to change, in advance.
1
2
MENU/
ENTER
3
4
5
To cancel selecting
Press CANCEL.
While playing and "SOUND1" or
"SOUND2" has been selected, press
MENU.
Press > or . repeatedly until
"S-SET" flashes in the display, and
then press ENTER.
The display shows the currently
selected "BASS" sound setting.
Press > or . repeatedly to
adjust the sound level.
Shows "SOUND1" or "SOUND2" is
selected
The sound can be adjusted in 8 steps
(–4, –3, ...±0, ...+2, +3).
Press ENTER.
"BASS" is set and the display
changes to "TRE" (treble) setting
mode.
Press > or . repeatedly to
adjust the sound level, and then press
ENTER.
"TRE" (treble) is set.
The sound settings are saved and the
playback display appears again.