Cleaning & Maintenance - Cuisinart CORDLESS MINI PREP PRO Manual

Food collects on lid or sides of work bowl:
You may be processing too much food. Turn the appliance off. When the
n
blade stops moving remove the lid and clean the work bowl and lid with
a spatula. You can also reverse the motor by alternating between 'Chop'
and 'Grind' . This will help to combine the ingredients and clean the sides
of the work bowl.
Food gets stuck on blade:
You may be processing too much food. Turn the appliance off. When the
n
blade stops moving, carefully remove it. Remove food from the blade
and work bowl using a spatula, and start again.
Cleaning & Maintenance
Always unplug the appliance adaptor from the electrical outlet before
n
cleaning.
All parts except the housing base are dishwasher safe. We recommend
n
washing them in the dishwasher on the top rack. Due to intense water
heat, washing the work bowl, lid and accessories on the bottom rack
may cause damage over time. Insert the work bowl upside down.
If you wash the blade by hand, wash with extreme care, the blade is very
n
sharp. Do not leave it in soapy water where it may disappear from sight.
Take extra care when loading and unloading the blade in the dishwasher.
n
To simplify cleaning, rinse the work bowl, lid and blade immediately
n
after use so food won't dry on them.
Chopping certain foods may scratch, cloud or discolour the work bowl.
n
Do not use abrasive cleaners on the housing base. Simply wipe with a
n
damp cloth and dry thoroughly.
Apply any cleaning agent to the cloth, not the housing base.
n
Always ensure the blades have been thoroughly cleaned after each use
n
and have dried completely before storing.
17