Table of Contents
Advertisement
PAN301x Bluetooth Module
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna,
•
Increase the separation between the equipment and receiver,
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected,
•
Consult the dealer or an experienced radio/TV technician for help.
6.2.3
Label Requirements
The following labelling requirements have to be implemented on the OEM end product:
The OEM must ensure that FCC labelling requirements are met. This includes
a clearly visible label on the outside of the OEM enclosure specifying the
appropriate Panasonic FCC identifier for this product as well as the FCC
Notice above.
The FCC identifier is FCC ID: T7V301X.
This FCC identifier is valid for the PAN3011, PAN3012, and PAN3013. The
end product must in any case be labelled on the exterior with:
"Contains FCC ID: T7V301X".
Due to the PAN301x model size, the FCC identifier is displayed in the installation instruction
only and it cannot be displayed readable on the module's label due to the limited size.
6.2.4
Antenna Warning
The following Antenna has to be followed by the OEM:
This antenna warning refers to the test device with the model number PAN301x.
The device is tested with a standard UFL connector and with the antenna listed below. When
integrated into the OEM's product, these fixed antennas require installation preventing end
users from replacing them with non-approved antennas. Any antenna not in the following table
must be tested to comply with FCC Section 15.203 for unique antenna connectors and with
Section 15.247 for emissions. The FCC identifier for the device with the antenna listed in
6.2.5 Approved Antenna List
6.2.5
Approved Antenna List
Item
Part Number
1 ANT016008LCS2442MA1
Module Integration Guide Rev. 1.0
6 Regulatory and Certification Information
is the same (FCC ID: T7V301X).
Manufacturer
Frequency Band
2.4 GHz
TDK
Type
Max. Gain
(dBi)
Chip antenna
1.6
Page 21 of 30
Advertisement
Table of Contents
