Huawei CloudEngine 9800 Series Quick Start Manual page 5

Step 5 Install the switch in the cabinet.
a. Lift the switch onto the expandable guide rails by two persons.
b. Slowly push the switch into the cabinet until the mounting brackets are attached to the
mounting rails.
c. Secure the front mounting brackets on the mounting rails with M6 screws.
Step 6 Install cable management frames. Align the four captive screws on the cable management frames
with the screw holes on the mounting brackets, and tighten the captive screws.
Step 7 Connect the ground cable to a ground point on the cabinet.
a. Remove the screw from the ground point (located at the power supply side) on the switch.
b. Connect the ground cable to the ground point on the switch.
c. Connect the ground cable to the ground point on the cabinet.
a
b
c
a
c
4
b