Table of Contents
Advertisement
Country-specific AC power cable
Power cables must be more than 10 cm away from signal cables.
The country-specific AC power outlet must have a current rating of 10 A and comply with local standards.
The AC power cable must be locked using a locking strap or bundled to the power module handle using a velcro
strap.
C13 straight female to C14 straight male AC power cable
Choose this type of power cable when the switch uses AC power modules and receives power from an AC PDU.
Choose this type of power cable when the switch uses 1200 W AC&240 V DC power modules and receives power
from a 240 V high-voltage DC PDU or power distribution box.
If a 240 V high-voltage DC power distribution box is used, make OT or cord end terminals for the cable. Cut the C14
straight male connector off and crimp OT or cord end terminals on the bare wires. Connect the brown wire to a
negative terminal on the DC power distribution box, the blue wire to a positive terminal, and the yellow-green wire
to a protection ground.
Ensure that the positive and negative poles of a DC power cable are correctly connected to the
positive and negative sockets on a DC power module, respectively.
The USB port is used to perform USB-based deployment or transfer configuration files and upgrade
files.
Connecting Cables
1
1
2
CloudEngine 9860-4C-EI
2
3
CONSOLE
4
SN
MAC
ETH
3
5
7
9
11
4
6
8
10
12
AIR OUT
AIR OUT
1-3
FAN
4-5
SYS
MST
L/A
USB
ID
5
13
15
17
19
21
14
16
18
20
22
AIR OUT
AIR OUT
7
23
25
27
29
31
CE98-D32CQ
RUN
24
26
28
30
32
AIR OUT
AIR OUT
AIR OUT
AIR OUT
AIR OUT
6
Advertisement
Table of Contents
