Disassembly Instructions - Mitsubishi Electric MUH-GD80VB Service Manual

12

DISASSEMBLY INSTRUCTIONS

<"Terminal with locking mechanism" Detaching points>
The terminal which has the locking mechanism can be detached as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
(1) Slide the sleeve and check if there is a locking lever or not.
Sleeve
Locking lever
MUH-GD80VB
OPERATING PROCEDURE
1.Removing the cabinet
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the top panel.
(6) Remove the valve cover.
(7) Remove the screws of the cabinet.
(8) Remove the cabinet.
(9) Remove the screws of the back panel.
(10) Remove the back panel.
Photo 3
Screws
of the
back
panel
Screws of the back panel
Slide the sleeve.
Pull the terminal while
pushing the locking
lever.
Screw of the motor support
(2) The terminal with this connector has the
locking mechanism.
Connector
Photo 1
Screws
of the
cabinet
Photo 2
Screw of the service panel
Screws
of the
cabinet
18
Hold the sleeve, and
pull out the terminal
slowly.
PHOTOS
Screw of the top panel
Screws of the cabinet
Screws
of the
top
panel
Screw
of the
valve
cover