Sharing Contents-Conducting Presentations - Cisco TelePresence EX90 User Manual

Cisco TelePresence System EX90
Sharing contents—conducting presentations
You may share contents
while in a call. The EX90
accepts two sources—via
DVI and via HDMI.
Note! You must be in a call to be able to share
contents. Your presentation source must be
powered and active as well as connected.
Otherwise the Presentation icon (button)
will fail to appear.
Tap STOP PRESENTING
User guide EX90, TC4.2, July 2011.
D14724.06
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
All manuals and user guides at all-guides.com
Once you are in
a call—and the
presentation source
is connected, powered
and active—the Presentation
icon (button) will appear.
In a call tap Presentation ...
If you have two sources connected,
you will be presented with the
possibility to swap between these at
any time.
to stop sharing
contents.
24
... then tap PRESENT to start sharing contents.
User guide
www.cisco.com