Loading Ramps - Kendon Stand-Up TRIKE/SPYDER/SIDECAR Ride-Up SRL Owner's Manual

-
Always secure the coupler closed with a retaining pin or lock prior to
towing
-
Failure to properly close and secure the coupler may result in
property loss or damage, injury, or death
5.2 Safety Cables
-
Open the two Safety Cable Connecting Links by unscrewing the
threaded gate counterclockwise
-
Attach the Connecting Links to your vehicles trailer hitch or a portion
of the vehicle's frame
-
Close both Connecting Links by screwing the threaded gates
clockwise until snug
5.3 Electrical and Lights
Plug the trailer's connector into your vehicle's trailer light outlet
-
-
Use an adapter as required
-
Test both turn signals and brake lights prior to towing

6.0 LOADING RAMPS

Your Kendon Ride-Up SRL Trike/Spyder/Sidecar Stand-Up™ Trailer is
equipped with a two-piece, full-width, slide-out loading ramp designed to
let you easily and safely load your vehicles onto the trailer.
6.1 Loading Ramp Components
-
Your trailer is equipped with a left and right loading ramp
-
Each loading ramp consists of 2 folding sections; left and right
-
Each loading ramp has 4 Loading Ramp Hooks; 2 per folding side
- The Rear Section has 4 matching Loading Ramp Hook Loops
-
The Hooks are designed to insert into the Loops to attach your
Loading Ramps to the Rear Section for loading and unloading
-12-