Advertisement
714-630-7144
www.KendonUSA.com
LOADING
Properly attach the loading ramps as per this manual's instructions.
The motorcycle must be loaded only on the center loading ramp.
Ensure the wheel chock on the rail is in the open position (pg. 10).
LOADING RAMPS
How to use the ramps on your Kendon Go! Series Ride-Up Single Trailer:
Insert the ramp hook as shown below between the tubular rails on the
rear folding section of the trailer.
This example might make it easier to understand: if the ramp hook was a
spoon, it should be positioned as if you were using it to eat soup, rather than
to pour soup out.
Please contact us directly at 714-630-7144 or info@KendonUSA.com if you
have any questions about ramp use or attachment.
- 3 -
Advertisement
