Trailer Layout - Kendon Stand-Up TRIKE/SPYDER/SIDECAR Ride-Up SRL Owner's Manual

Safety is our number one concern. Before using this product, please
completely read these specific trailer instructions and familiarize yourself
thoroughly with the parts on your new Kendon Stand-Up™ Trailer.
SRL technology
SRL is short for "Suspension Reactive Loading." SRL technology is a
combination of frame geometry, suspension components, and loading
ramp angle that minimize the apex created by a traditional ramp angle
and the bed of the trailer when loading and unloading.
The independent torsion suspension on your Kendon trailer works with
the loading ramp and the geometry of the rear section to minimize the
apex and create a smooth parallel surface for loading and unloading.
This means that there is a much lower angle when loading/unloading a
bike and virtually no point to hit the frame of the bike.
Safety Information
-
Read and understand all warnings and warning labels before use
-
Do not remove any warning labels or warning tags except for the
warning label on the coupler that must be removed before use
- Towing any trailer, proper loading, unloading and securing of the
load is serious business with inherent risks
-
Serious injury, death and/or property damage can result to operator
and/or others through improper use of this product
-
If you have any questions or need additional help or instructions,
please see your local Kendon dealer or contact us directly at 714-
630-7144 or
-
If you lost or need additional copies of any of the instructions manual
referenced here, please visit our web site at www.KendonUSA.com
or contact us at 714- 630-7144 or info@KendonUSA.com
-
Visit www.KendonUSA.com for new products, and support

3.0 TRAILER LAYOUT

Please familiarize yourself with the layout and components of your
Kendon Ride-Up SRL Trike/Spyder/Sidecar Stand-Up™ Trailer.
info@KendonUSA.com
-4-