Table of Contents
Advertisement
3.1 Loading Ramps
-
Your trailer is equipped with two slide-out, folding loading ramps
-
The two ramps work together to form a full-width loading ramp
-
Always use the two ramps together to provide a safe loading surface
-
Loading ramps fold shut and slide onto the angled slide brackets
below the rear section
3.2 Rear Section
Your Kendon Stand-Up™ Trailer is designed to fold up and stand up
-
to save storage space
-
The Rear Section of your trailer folds onto the Front Section for
storage or when no vehicle is being towed on the trailer
-
The Rubber Latch holds the rear section closed when not in use
-
Always tow the empty trailer with the Rear Section folded closed
-
If the Rear Section is too heavy to fold closed, remove the Loading
Ramps and store separately
3.3 Front Raised Rail
-
Your trailer features a Front Raised Rail that acts as a wheel stop for
most vehicles
-
Can-Am Spyders, sidecars, two-wheeled motorcycles, ATVs, UTVs,
SxSs, and other vehicles with exposed front wheels should be rolled
all the way to the front of the trailer until the front tires contact the
Front Raised Rail
-
Use the Front Raised Rail to anchor tie-downs
-5-
Advertisement
Table of Contents
