Fuse Replacement - Phoenix Gold ZQ Series Owner's Manual

4 channel high-end amplifier

Hide thumbs Also See for ZQ Series:

Table of Contents

ZQ9004 Owners Manual

PRECAUTIONS

u This unit is designed for negative ground 12V DC operation only.

u Avoid installing the amplifier where:

- It would be subject to high temperature, such as from direct sunlight

or hot air from the heater

- It would be exposed to rain or moisture.

- It would be subject to dust or dirt.

u If your car is parked in direct sunlight and there is a considerable rise in

temperature inside the car, allow the amplifier to cool off before operation.

u When installing the unit horizontally, be sure not to cover the heatsink fins

with the floor carpet.

u If this unit is placed too close to the car radio, an interference may occur.

In this case, separate the amplifier from the car radio.

u This power amplifier employs a protection circuit to protect the transistors

and speakers if the amplifier malfunctions. Do not attempt to test the

protection circuits by covering the heatsink or connecting improper loads.

Do not use the amplifier with a weak auto battery as its optimum

performance depends on a normal battery supply voltage.

u For safety reasons, keep the volume of your car audio system moderate so

that you can still hear normal traffic sounds outside your car.

FUSE REPLACEMENT

If the fuse blows, check the power connection and replace the fuse. If the fuse

blows again after replacement , there may be an internal malfunction . In this

case, consult your dealer.

WARNING:

Use the specified fuse. Using of a higher fuse may cause serious damage.

PROTECTION CIRCUIT:

This amplifier is provided with a protection circuit which operates in the follow-

ing cases when:

u The unit is overheated.

u The speaker terminals are short circuited.

ZQ9004 - 4 CHANNEL AMPLIFIER

Table of Contents

Zq9004