Download Print this page
Phoenix Gold Z Series Manual
Hide thumbs Also See for Z Series:

Advertisement

Quick Links

Z-Series
Amplifiers
Les amplificateurs de la série Z
Los amplificadores series Z
Models: Z150.2 - Z300.1 - Z300.4 - Z600.5 - Z1000.1
FEATURES
Integrated Cooling Fan - Regulates amplifier temperature for sustained performance
High & Low Level Inputs - Versatile connectivity to suit any vehicle (ZRHC High Level Adaptor required) - sold separately
OEM Connection Ready - Compatible with aftermarket or original fit source units
High Level Auto-Turn On - Powers on the amplifier when an audio signal is supplied (via the ZRHC High Level Adaptor)
Remote Bass Ready - Control the Bass Level with the ZRBC (sold separately)
4-Way Protection Circuit - Thermal / Reversed Power and Speaker Polarity / Low Voltage
Heavy Duty Connector Block - Enables Maximum Current Supply
CARACTÉRISTIQUES
Ventilateur de refroidissement intégré - Régule la température de l'amplificateur pour une performance soutenue
Entrées haute et basse - Connectivité polyvalente pour tous les véhicules (ZRHC Haut niveau Adaptateur
requis) - vendu séparément
Prêt pour une connexion OEM - Compatible avec les unités d'origine et de rechange.
Mise sous tension automatique à haut niveau - Allume l'amplificateur lorsqu'un signal audio est détecté
(via l'adaptateur ZRHC de haut niveau)
Prêt pour la commande des graves à distance - Contrôle du niveau des graves avec le ZRBC (vendu séparément)
Circuit de protection 4-voies - Puissance thermale/inversée et haut-parleur Polarité/Basse tension.
Bloc de connecteur robuste - Permet une alimentation maximale
CARACTERÍSTICAS
Ventilador de Refrigeración Integrado - Regula la temperatura del amplificador para mantener su buen rendimiento
Entradas de Alto y Bajo Nivel - Conectividad versátil para adaptarse a cualquier vehículo (Se requiere de un
Adaptador ZRHC de Alto Nivel) – El mismo se vende por separado
Conexión de OEM Lista - Compatible con unidades originales o de segunda mano.
Encendido Automático de Alto Nivel - Se enciende el amplificador cuando se suministra una señal de audio (A través
del Adaptador de Alto Nivel ZRHC)
Control Remoto de Bajos - Controle el nivel de graves con el ZRBC (se vende por separado)
Circuito de Protección de 4 vías - Potencia térmica / retroceso y altavoz Polaridad / baja tensión.
Bloque de conector robusto - Permite una máxima potencia

Advertisement

loading

Summary of Contents for Phoenix Gold Z Series

  • Page 1 Z-Series Amplifiers Les amplificateurs de la série Z Los amplificadores series Z Models: Z150.2 - Z300.1 - Z300.4 - Z600.5 - Z1000.1 FEATURES Integrated Cooling Fan - Regulates amplifier temperature for sustained performance High & Low Level Inputs - Versatile connectivity to suit any vehicle (ZRHC High Level Adaptor required) - sold separately OEM Connection Ready - Compatible with aftermarket or original fit source units High Level Auto-Turn On - Powers on the amplifier when an audio signal is supplied (via the ZRHC High Level Adaptor) Remote Bass Ready - Control the Bass Level with the ZRBC (sold separately)
  • Page 2 1 Ohm Impedance 4 ohm bridged 4 ohm bridged 4 ohm bridged Note: Phoenix Gold Amplifiers have a minimum load impedance of 2ohm per channel 4ohm bridged (except Z1000.1 - which is 1 Ohm) © 2017 Phoenix Gold • www.phoenixgold.com...
  • Page 3: Installation Warnings

    Select a location that provides protection from moisture. Keep in mind that an amplifier should never be mounted upside down. Upside down mounting will compromise heat dissipation through the heat sink and could engage the thermal protection circuit. © 2017 Phoenix Gold • www.phoenixgold.com...
  • Page 4: Amplifier Connection

    Z300.4 - Z300.1 - Z600.5 Ensure ALL other cable connections are completed before connecting this cable to the battery. PHOENIX GOLD amplifiers should be connected directly to the 12v battery terminal using the appropriate gauge cable. Start at the FUSE INSIDE vehicles battery and run the cable through to the amplifier.
  • Page 5 (4 ohm) subwoofers connect each coil to positive or negative terminal. For a standard single coil subwoofer INTERNALLY LINKED connect to either positive and either negative terminal. 4C. Single Channel Output (Z1000.1 ONLY) (1 Ohm minimum) © 2017 Phoenix Gold • www.phoenixgold.com...
  • Page 6 2 x Front/Rear Speakers Front Rear FUSE INSIDE Z300.4 BRIDGED (4 Ohm Subwoofer) Bridged Rear Channels Z150.2 INPUT INPUT AUTO VOLTAGE TURN ON LPFH GAIN HPF FULL LPF HIGH REMOTE 50Hz 250Hz 50Hz 250Hz © 2017 Phoenix Gold • www.phoenixgold.com...
  • Page 7 Use these RCA connectors to connect to a secondary amplifier. This output is a pass-thru connection from the RCA input connectors so that the signal level and frequency response is the same as the original input signal. © 2017 Phoenix Gold • www.phoenixgold.com...
  • Page 8 13. Remote Bass Controller Port This connection should be used with the optional remote control (ZRBC - sold separately) to adjust the bass level from any location within the vehicle. © 2017 Phoenix Gold • www.phoenixgold.com...
  • Page 9 High level (speaker wire) connection. Where possible RCA (Low Level) connections are preferable. High The High setting is selected when the Phoenix Gold High Level adaptor (sold separately) is used to connect a full range signal from the source (head) unit speaker connections to the amplifier.
  • Page 10 No Sound Head unit Check head unit volume LED = Green Amplifier Check all power, remote on and ground connections Speakers Check speakers are correctly connected Check speakers for shorts © 2017 Phoenix Gold • www.phoenixgold.com...
  • Page 11 Phoenix Gold Product Warranty LIMITED WARRANTY Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) years from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only.

This manual is also suitable for:

Z150.2Z300.1Z300.4Z600.5Z1000.1Z-series