Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Phoenix Gold ZDA4.6
Summary of Contents for Phoenix Gold ZDA4.6
- Page 1 4-Channel DSP Amplifier Model: ZDA4.6 Model: Z110-V2, Z112-V2 KEY FEATURES • DSP + Amplifier • 800W Max Power, 400W RMS • 4x60W @ 4Ohm, 4x100W @ 2Ohm with DSP control • PC Control software (and APP control ready iOS and Android) •...
-
Page 2: Installation
Next, connect the negative wire to the vehicle chassis to create a GND connection. u Put the REM from main engine to “FL+” on the ZDA4.6 HI INPUT u Finally, ensure all other connections are made, plug in PCA out, and ensure the unit is fixed securely in a location free of dirt and dust with enough ventilation for optimum operation. - Page 3 First, ensure the mounting location is free of dirt and dust and that there is enough ventilation in order to achieve optimum performance and avoid overheating when the ZDA4.6 is in use. u Keep the wire connections as short as possible but with sufficient length in order to minimise any power losses and provide a higher audio output of the system.
-
Page 4: Operation
The PC software supplied offers a convenient and user-friendly interface that allows you to save various settings and parameters from the ZDA4.6, along with letting you switch or recover settings saved for multiple vehicles. As well as the software included with the ZDA4.6, it can also be downloaded phoenixgold-eu.com here: if required. -
Page 5: Usb Interface Connection
RED. Once the DSP is connected, a dialogue box will show a ‘CONNECTING TO DATA’ message on screen. After a few seconds, the OFFLINE button will change to ONLINE and become GREEN. OFFLINE ONLINE © 2021 Phoenix Gold • www.phoenixgold-eu.com... -
Page 6: Software Interface
ZDA4.6 Owners Manual ZDA4.6 - DSP AMPLIFIER SOFTWARE INTERFACE © 2021 Phoenix Gold • www.phoenixgold-eu.com... - Page 7 HPF (high pass or low cut) or LPF (low pass or high cut) to adjust the High Pass (low cut) or Low Pass (high cut) frequency. OUTPUT CHANNELS CORRESPONDING TO THE SOUND FILED AND TIME DELAY © 2021 Phoenix Gold • www.phoenixgold-eu.com...
-
Page 8: Output Channels
The parame- ters range is listed below: MS: 0.000 MS - 20.000 MS CM: 0.00 CM - 692.00 CM INCH: 0.00 INCH - 272.37 INCH CROSSOVER AREA © 2021 Phoenix Gold • www.phoenixgold-eu.com... - Page 9 (0.404-28.82) by inputting the numbers, rolling the mouse or using the keyboard arrow keys. In the graphic equaliser mode, the frequency is the 1/3 oct of the default value assignment; and will not show a specific value. © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 10 © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 11 Left-click the icon under the CH1 - CH6 channel volume and the icon will change. This enters MUTE state, click again to cancel MUTE. 4. OUTPUT Left click the output link, and the system as show in the diagram: © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 12 (as shown below) Click the “UNLINK” button to exit the LINK mode. 5. RESET OUTPUT Left-click the “RESET OUTPUT” to pop-up a dialogue box as below, and choose “Empty”, “Default” or “Cancel”. 6. SIGNAL INPUT AREA Current Signal State. © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 13 SYSTEM Left-click the system and show up as below options 1. LANGUAGE SWITCH 2. FIRMWARE UPGRADES - For Software Upgrade 3. HELP - For System Help 4. ABOUT - For Software Version Info © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 14 The iOS and Android APP software installation are similar, and here is the Android APP software installation as an example: OPERATION ENVIRONMENT Con- nect to the Android system. Find the “ZDA4.6.apk” executable files on the Phoenixgold-eu.com, and copy to your Android operating system, click this file and choose install to finish instal- lation in few seconds.
-
Page 15: Close Button
SOFTWARE ONLINE Before connecting to online, please make sure the Android system Bluetooth is open, and find the name “ZDA4.6” in the Bluetooth connection interface, then click to make a connection. Once you are notified that the connection is successful, you will not need make connection again. -
Page 16: Master Volume
(adjust range 0dB-46dB) SOUND EFFECT You can select any sound effect from the presets. The sound effect name will display in the choice box once selected. © 2021 Phoenix Gold • www.phoenixgold-eu.com... -
Page 17: Advanced Settings
ZDA4.6 Owners Manual ZDA4.6 - DSP AMPLIFIER APP SOFTWARE OPERATION INSTRUCTIONS ADVANCED SETTINGS Click advance settingto enter BACK TO MAIN PAGE Click “BACK” to exit © 2021 Phoenix Gold • www.phoenixgold-eu.com... - Page 18 In this area you can click MS, CM and INCH these 3 unit buttons to set up time delay and distance. The parameters as bellow: 0.00 MS -20.000 MS 0.00 CM - 692.00 CM INCH 0.00 - 272.37 INCHES © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 19 Click the HPF or LPF filter frequency button, and enter into the “Frequency” setting page. And you can click”+””-” or push the fader to finish the Frequency setting. And the range as below: HPF Frequency: 20HZ-20KHZ LPF Frequency: 20HZ -20KHZ © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 20 Click the “Channel” and enter into as below operation interface You can adjust Volume, Mute, positive phase/opposite phase for CH1 - CH6 output per each channel separately: LINK Click LINK and pop-up as below tips: © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 21 Choose the synchronisation mode and click “YES” enter into below LINK mode; Click “Cancel” to exit the LINK mode. RESET Click “Reset” and enter into dialogue box right, and choose EMPTY, DEFAULT or CANCEL. © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 22 In the graphic equaliser mode, the frequency is the 1/3 oct of the default value assignment but does not show the specific value. © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 23 6. PROGRAM Click Program” button and enter into interface. You can save, call or cancel the saved settings according to the current scene parameters. © 2021 Phoenix Gold • www.phoenixgold-eu.com...
-
Page 24: Specification
6dB/oct - 12dB/oct EQ Band 10-Band per channel EQ Gain -12dB ~ +12dB EQ Q-Value 0.404~+28.852 S/N Ratio 102dB Time Delay 20 MS per channel 0.021ms step Product Size 266 x 150mm x 45mm © 2021 Phoenix Gold • www.phoenixgold-eu.com... - Page 25 ZDA4.6 Owners Manual ZDA4.6 - DSP AMPLIFIER NOTES: © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 26 ZDA4.6 Owners Manual ZDA4.6 - DSP AMPLIFIER NOTES: © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 27 ZDA4.6 Owners Manual ZDA4.6 - DSP AMPLIFIER NOTES: © 2021 Phoenix Gold • www.phoenixgold-eu.com...
- Page 28 Phoenix Gold Product Warranty LIMITED WARRANTY ON AMPLIFIERS Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) years from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only.