Table of Contents
Advertisement
Description:
Controller for Heat Generator, single [Art. No. ECO-KE / 7388036]
Immediately after heat is taken from the accumulator to cover a heat requirement (stand-
alone operation), an additional heat generator is automatically connected. Loading of the
storage accumulator can only be loaded using the PYROMAT. When it is put into operation,
the additional heat generator disconnects, and the closed shut-off valve prevents it from
being flowed through.
Scope of delivery:
-
Pushbuttons for additional heat generators
Controller output for shut-off valve (2) and burner (3)
-
Note:
Only for PYROMAT-ECO and PYROMAT-DYN with ECO function.
See Hydraulic Drawing 2960 PYROMAT-ECO or 3950 PYROMAT-DYN with ECO function.
Controller for Heat Generator, single, gliding [Art. No. ECO-KG / 7387859]
Immediately after heat is taken from the accumulator to cover a heat requirement (stand-
alone operation), an additional heat generator is automatically connected. Loading of the
storage accumulator can only be loaded using the PYROMAT. When it is put into operation,
the additional heat generator disconnects, and the closed shut-off valve prevents it from
being flowed through. The boiler temperature is variably regulated to a minimum
temperature according to the heat requirement.
Scope of delivery:
Pushbuttons for additional heat generators
-
-
Controller output for shut-off valve (2) and burner (3)
-
Flow sensor QAD 21, uninstalled
Note:
Only for PYROMAT-ECO and PYROMAT-DYN with ECO function.
See Hydraulic Drawing 2960 PYROMAT-ECO or 3950 PYROMAT-DYN with ECO function.
Controller for Heat Generator, parallel KP2
When required, an additional heat generator is automatically connected. This may occur
after heat is taken from the accumulator to cover the overall heat requirement heat
requirement (stand-alone operation). Or the additional heat generator may be used to cover
a peak requirement for heat (parallel operation to the biomass boiler). For parallel operation,
a burner group is necessary for heat diversion, which simultaneously also provides for
keeping up the return flow. On request, the additional heat generator can load the
accumulator (as desired to B28.1, B28.2 or B28.3).
Scope of delivery:
Pushbuttons for additional heat generators
-
-
Controller output for pump (1), mixing valve (2) and burner (3)
Return flow sensor QAD 21, uninstalled
-
Note:
Only for PYROMAT-ECO and PYROMAT-DYN with ECO function.
See Hydraulic Drawing 2960 PYROMAT-ECO or 3950 PYROMAT-DYN with ECO function.
Köb Holzheizsysteme GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 65707, E-Mail: office@kob.cc
Spec Sheet
ECOTRONIC - Heating Control Unit
Auxiliary Heat Generators
[Art. No. ECO-KP2 / 7387864]
Subject to technical changes
4030-1
2009-03-01_GB
Advertisement
Table of Contents
