Table of Contents
Advertisement
Manual installation (For Windows 8/Windows 8.)
In the case of network connection /
USB Flash Drive output
06
Manually installing / uninstalling the Printer Driver
Open [Control Panel]-[Hardware and Sound]-[Devices and
Printers] in this order, right-click on the installed printer and
click [Printer properties] from the menu that appears.
Click [Print processor] of the [Advanced] tab.
Select the following print processor from the list and click it.
In the case of a Windows 8 (32-bit)/Windows 8.1 (32-bit):
For MZ0, MZ8 series ..................RV8WP
For RZ0 series ............................RV8ZP
For EZx/EZx/EZ2x series ...RV8GP
In the case of a Windows 8 (64-bit)/Windows 8.1 (64-bit):
For MZ0, MZ8 series ..................RV6WP
For RZ0 series ............................RV6ZP
For EZx/EZx/EZ2x series ...RV6GP
Select [NT EMF 1.008] from the list of default data types, and
click [OK].
Print a test page from the [General] tab.
Click [OK] to close the window.
Open [Control Panel]-[Hardware and Sound]-[Devices and
Printers] in this order, and select [Add a Printer] for start-
ing.
Click [Add a local printer] of the [Add a Printer] dialog box.
Create the port.
In the case of network connection:
Create TCP/IP port or LPR port.
In the case of USB Flash Drive output:
Create the local port (C:\RISO\RISORINC.prn, etc.).
IMPORTANT!
You cannot create the local port in the route of the startup drive.
Create any folder, and then create the local port in the folder.
Advertisement
Table of Contents
