For Windows Vista; Manual Installation; In The Case Of Usb Cable Connection - Riso MZ 10 Series User Manual

For Windows Vista

■ Manual installation

In the case of USB cable connection

IMPORTANT!
• To install the Printer Driver, it is necessary to log on to Windows by the account
with the authority to change the system setting (administrator etc.).
• Printer sharing is not supported.
Turn the power of the printer on, and connect the USB cable
to the printer.
Start your computer.
Connect the USB cable to your computer.
In the [Found New Hardware] window, select [Locate and
install driver software] and then [Don't search online].
Select [I don't have the disk. Show me other options.], and
then [Browse my computer for driver software].
Insert the [RISO Printer Driver] CD-ROM into your compu-
ter.
In the [Browse] window, select the inf file of the driver to
install.
For Windows Vista (32-bit): (CD-ROM): [Windows 32-bit]-[Driver]-[WinVista_
For Windows Vista (64-bit): (CD-ROM): [Windows 64-bit]-[Driver]-[WinVista_
Select the printer in use and click [Next].
Restart your computer.
Open [Control Panel]-[Hardware and Sound]-[Printers] in
this order, and open the properties of the printer in which
the Printer Driver has been installed.
8]-[English]-RISODRV.INF
8]-[English]-RISODRV.INF
Manually installing / uninstalling the Printer Driver
97