Hilti SCO 6-A22 Original Operating Instructions page 23

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held cordless cut-out tool. It is designed for making cut-outs in drywall
board, gypsum fiber board, composite materials and wood or wood-like materials.
The product can be equipped with a removable connector for an optional vacuum cleaner / dust removal
hose. This connector is designed to fit standard vacuum cleaner hoses. Use of a suitable adapter may be
necessary in order to connect a vacuum cleaner hose to the product.
▶ Use only Hilti Li­ion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Items supplied
Cut-out tool, depth gauge, three collets (3.2 mm (1/8"), 4 mm (5/32"), 6.4 mm (1/4")), clamping nut, hex. key,
operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Safety devices
This product has a motor protection system. It monitors current consumption and motor temperature and
prevents the product from overheating.
If the motor is overloaded through application of excessive working pressure, the product's performance
drops noticeably or it might stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the product
and then allow it to run under no load for approx. 30 seconds.
*2194405*
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
|
2194405
Vacuum cleaner hose connector (accessory)
LED lights
Depth gauge
Securing screw
On/off switch
Switch-on interlock release button
Accessory tool
Collet
Clamping nut
Insulated gripping surface
Spindle lockbutton
Insulated gripping surface
Air vents
Release button with additional function
(charge state display activation)
Battery
English 17