Introduction; Unpacking; Warning; Placement - Qtx QTFX-400 User Manual

Introduction

Thank you for choosing the QTFX-400 compact fog machine as part of your stage effects
system. This product is designed to offer professional quality performance in a neat and
manageable format.
Please read these instructions in full to gain the best results from this item and avoid damage
to the unit through misuse.

Unpacking

Your QTFX-400 should reach you in good condition and should be supplied with IEC mains
lead(s), mounting bracket and a wired handheld remote control.
If there are any signs of damage or items missing from the packaging, contact your dealer
immediately.

Warning

To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on the housing or through the vents, disconnect the mains, allow the
QTFX-400 to dry out and have it checked by qualified personnel before further use.
Avoid any impact, dropping or extreme pressure to the housing.
No user serviceable parts inside - do not open the case.
Allow the QTFX-400 to acclimatize to room temperature before operating.
Refer all servicing to qualified service personnel.

Placement

The QTFX-400 has a built-in fluid tank and should be operated in an upright position.
If free-standing, ensure that the QTFX-400 is positioned on a stable, non-slip surface.
If mounted at height, use the integral bracket and it is advisable to add a safety cable.

Safety

• Check for correct voltage and condition of IEC lead before connecting to power outlet
• Check the condition of the remote lead and ensure that it is not trapped
• This unit must be earthed
• This unit uses a heating element - do not touch the nozzle area whilst in use!

Cleaning

• Use a soft dry or slightly damp to clean the casing
• Do not use strong solvents for cleaning the unit
• It is recommended to use fog machine cleaning fluid (160.670UK) periodically
www.avsl.com 160.461 User Manual