Remote Control; Replacing The Fuse; General Maintenance; Specifications - Qtx QTFX-B4 User Manual

Remote control

When the remote control is connected and the rear rocker switch is pressed to the REMOTE
setting, pressing the button on the remote produces bubble output on demand.

Replacing the fuse

Disconnect from the main power supply first, then remove the fuse holder part of the IEC Socket to reveal the
fuse. Replace the correct fuse rating as stated on the fixture safety label or in the user guide. Lock the fuse
holder cover back into place.

General maintenance

To maintain optimum performance and minimize wear, the item should be cleaned frequently. Usage and
environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned
after each use to avoid dust build-up and blockages, which can result in poor performances, overheating and
breakages. Be sure to power off fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust collected on
external vents and internal components. Clean the external case when the fixture is cold with a dry cloth or
tissue and drag dirt and grime to the outside case.
To ensure a continuing high performance it is recommended to use warm water to clean the internal tank.

Specifications

Power supply
Number of wheels
Number of wands per wheel
RPM (per wheel)
Dimensions
Weight
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its
Errors and omissions excepted.
Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater Park,
Taylor Road, Trafford Park, Manchester. M41 7JQ.
www.avsl.com
230Vac, 50Hz
2
10
60
380 x 450 x 470mm
10.5kg
useful life. The goods must be disposed of according to your local council guidelines
AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.
160.564UK Manual