Advertisement
The following table describes the interfaces and the buttons.
Interface
RJ-11 port. Connect the router to DSL
DSL
connector or splitter through telephone cable.
RJ-11 port, using the telephone cable to
Phone1/2
connect the telephone set.
RJ-45 port, for connecting the router to a PC or
LAN 4~1
another network device.
For connecting Ethernet cable to provide
WAN
Ethernet uplink.
Press the button for at least 1 second and then
Reset
release it. System restores the factory default
settings.
USB port, for connecting the 3G network card
USB1/2
or other USB storage devices.
Power interface, for connecting the power
Power
adapter.
On/Off
Power switch.
WiFi switch, for enabling or disabling the WiFi
WiFi
function.
This button is used for enabling WPS PBC
mode. If WPS is enabled, press this button, and
WPS
then the wireless router starts to accept the
negotiation of PBC mode.
All manuals and user guides at all-guides.com
Description
Advertisement
