Ovislink OV504WN User Manual
  1. Manuals
  2. Brands
  3. Ovislink Manuals
  4. Network Router
  5. OV504WN
  6. User manual

Ovislink OV504WN User Manual

Hide thumbs Also See for OV504WN:
Table of Contents

Advertisement

Quick Links

Ovislink OV504WN
User Manual
Ver 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OV504WN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ovislink OV504WN

Summary of Contents for Ovislink OV504WN

  • Page 1 Ovislink OV504WN User Manual Ver 1.0...

  • Page 2: Table Of Contents

    Contents Safety Precautions ..................... 1 Overview ......................2 Application ..................... 2 Features ....................2 Standards Compatibility and Compliance..........3 Hardware Description and Hardware Installation..........5 Hardware Description ................5 3.1.1 Front Panel ................. 5 3.1.2 Rear Panel.................. 6 Hardware Installation................7 3.2.1 Choosing the Best Location for Wireless Operation....
  • Page 3 5.5.3 Access Control................71 5.5.4 Update Software ............... 72 5.5.5 Reboot ..................73 Q&A........................74...

  • Page 4: Safety Precautions

    Ovislink OV504WN_User Manual 1 Safety Precautions Read the following information carefully before operating the device. Please follow the following precaution items to protect the device from risks and damage caused by fire and electric power: Use volume labels to mark the type of power.

  • Page 5: Overview

    Ovislink OV504WN_User Manual 2 Overview The DSL Router is a highly ADSL2+ Integrated Access Device and can support ADSL link with downstream up to 24 Mbps and upstream up to 1 Mbps. It is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or 802.11g/802.11b/802.11n wireless network.

  • Page 6: Standards Compatibility And Compliance

    Ovislink OV504WN_User Manual Several pre-configured popular games. Just enable the game and the port settings are automatically configured. Compatible with all standard Internet applications Industry standard and interoperable DSL interface Simple web-based status page displays a snapshot of system configuration,...
  • Page 7 Ovislink OV504WN_User Manual ITU G.994.1 (G.hs) ITU G.992.3 (ADSL2) ITU G.992.5 (ADSL2+) ANSI T1.413 Issue 2 IEEE 802.3 IEEE 802.3u IEEE 802.11b IEEE 802.11g IEEE 802.11n...

  • Page 8: Hardware Description And Hardware Installation

    Ovislink OV504WN_User Manual 3 Hardware Description and Hardware Installation 3.1 Hardware Description 3.1.1 Front Panel Figure 1 Front panel The following table describes the indicators on the front panel. Indicator Color Status Description Green Power is on. Power is on and the device is Power initiating.

  • Page 9: Rear Panel

    Ovislink OV504WN_User Manual Indicator Color Status Description Green DSL link has established. Blink twice Green No DSL link is detected. every second ADSL Blink four times at Green DSL link is detected. every second Device is powered off. Green PPP/DHCP takes effect.

  • Page 10: Hardware Installation

    Ovislink OV504WN_User Manual The following table describes the interfaces or the buttons on the rear panel. Interface Description This button is used for enabling WPS PBC mode. If WPS is enabled, press this button, and then the wireless router starts to accept the negotiation of PBC mode.

  • Page 11: Connecting The Device

    Ovislink OV504WN_User Manual range. Typical ranges vary depending on types of materials and background RF noise in your home or business. 3.2.2 Connecting the Device Please follow the steps below to connect the device. Step1 Connect the ADSL port of the DSL router with a telephone cable.

  • Page 12: Pc Network Configuration And Login

    Ovislink OV504WN_User Manual 4 PC Network Configuration and Login 4.1 PC Network Configuration Each network interface on the PC should either be configured with a statically defined IP address and DNS address, or be instructed to automatically obtain an IP address using the network DHCP server.
  • Page 13 Ovislink OV504WN_User Manual Figure 4 IP and DNS configuration TCP/IP configuration steps for Windows XP are as follows: Step1 Choose Start > Control Panel > Network Connections. Step2 Right-click the Ethernet connection icon and choose Properties. Step3 On the General tab, select the Internet Protocol (TCP/IP) component...

  • Page 14: Logging In To The Dsl Router

    Ovislink OV504WN_User Manual Step4 The Internet Protocol (TCP/IP) Properties window appears. Step5 Select the Obtain an IP address automatically radio button. Step6 Select the Obtain DNS server address automatically radio button. Step7 Click OK to save the settings. 4.2 Logging In to the DSL Router...
  • Page 15 Ovislink OV504WN_User Manual Figure 5 Login page After logging in to the DSL router as a super user, you can query, configure, and modify all the settings, and diagnose the system.

  • Page 16: Web-Based Management

    Ovislink OV504WN_User Manual 5 Web-Based Management This chapter describes how to use Web-based management of the DSL router, which allows you to configure and control all of DSL router features and system parameters in a user-friendly GUI. 5.1 Quick Setup Choose Quick Setup and the following page is displayed.

  • Page 17: Advanced Setup

    Ovislink OV504WN_User Manual 5.2 Advanced Setup 5.2.1 Layer2 Interface ATM Interface Choose Advanced Setup > Layer2 Interface > ATM Interface , and the following page appears. Figure 6 DSL ATM interface configuration In this page, you can add or remove the DSL ATM Interfaces.
  • Page 18 Ovislink OV504WN_User Manual Figure 7 ATM PVC configuration In this page, you can set the VPI and VCI values, and select the DSL latency, link type (EoA is for PPPoE, IPoE, and Bridge.), connection mode, encapsulation mode, service category, and IP QoS scheduler algorithm.

  • Page 19: Wan Service

    Ovislink OV504WN_User Manual Select DSL Link Type: You may select EoA (it is for PPPoE, IPoE, and Bridge), PPPoA, or IPoA. Select Connection Mode: You may select the Default Mode or the VLAN MUX Mode. Encapsulation Mode: You may select LLC/SNAP-BRIDGING or VC/MUX in the drop-down list.
  • Page 20 Ovislink OV504WN_User Manual Step1 In the Wide Area Network (WAN) Service Setup page, click the Add button to display the following page. (At first, you must add a proper ATM configuration for this WAN service.) Figure 9 WAN service interface configuration (PPPoE) Step2 In this page, you can select a ATM Interface for the WAN service.
  • Page 21 Ovislink OV504WN_User Manual Figure 10 WAN service configuration (PPPoE) Step3 In this page, select the WAN service type to be PPP over Ethernet (PPPoE). Click Next to display the following page.
  • Page 22 Ovislink OV504WN_User Manual Figure 11 PPP username and password (PPPoE) Step4 In this page, you can modify the PPP username, PPP password, PPPoE service name and authentication method. PPP Username: The correct user name provided by your ISP. PPP Password: The correct password provided by your ISP.
  • Page 23 Ovislink OV504WN_User Manual Enable Fullcone NAT:. NAT is one where all requests from the same internal IP address and port are mapped to the same external IP address and port. Furthermore, any external host can send a packet to the internal host, by sending a packet to the mapped external address.
  • Page 24 Ovislink OV504WN_User Manual Figure 12 Routing-default gateway (PPPoE) Step6 In this page, select a preferred WAN interface as the system default gateway and then click Next to display the following page.
  • Page 25 Ovislink OV504WN_User Manual Figure 13 DNS server configuration(PPPoE) Step7 In this page, you may obtain the DNS server addresses from the selected WAN interface or manually enter the static DNS server addresses. If only a PVC with IPoA or static MER protocol is configured, you must manually enter the static DNS server addresses.
  • Page 26 Ovislink OV504WN_User Manual Figure 15 Completing the settings of PPPoE WAN service Adding a MER (IPoE) WAN service This section describes the steps for adding the ipoe_0_0_37 (MER mode) service. Step1 In the Wide Area Network (WAN) Service Setup page, click the Add button to display the following page.
  • Page 27 Ovislink OV504WN_User Manual Figure 16 WAN service interface configuration (IPoE) Step2 Select an ATM Interface, for example, atm1/(0_0_37), and then click Next to display the following page.
  • Page 28 Ovislink OV504WN_User Manual Figure 17 WAN service configuration (IPoE) Step3 In this page, select the WAN service type to be IP over Ethernet, and r the service description. After finishing setting, click Next to display the following page.
  • Page 29 Ovislink OV504WN_User Manual Figure 18 WAN IP settings (IPoE) Step4 In this page, you may themodify the WAN IP settings. You may select obtain an IP address automatically or manually enter the IP address provided by your ISP. Click Next and the following page appears.
  • Page 30 Ovislink OV504WN_User Manual Figure 19 Network address translation settings (IPoE) Step5 In this page, you can set the network address translation settings,for example, enabling NAT, enabling firewall, and.enabling IGMP multicast. After finishing setting, click Next and the following page appears.
  • Page 31 Ovislink OV504WN_User Manual Step6 In this page, select a preferred WAN interface as the system default gateway and then click Next to display the following page. Figure 21 DNS server configuration (IPoE) Step7 In this page, you may obtain the DNS server addresses from the selected WAN interface or manually enter static DNS server addresses.
  • Page 32 Ovislink OV504WN_User Manual Figure 22 IPoE summary Step8 In this page, it displays the information about the IPoE settngs.Click Apply/Save to save and apply the settings, and then the following page appears. You can modify the settings by clicking the Back button if necessary.
  • Page 33 Ovislink OV504WN_User Manual Step1 Choose Advanced Setup > Layer2 Interface > ATM Interface to dsipaly the DSL ATM Interface Configuration page. In this page, you need to add a PVC for PPPoA mode. Click the Add button in the DSL ATM Interface Configuration page to display the following page.
  • Page 34 Ovislink OV504WN_User Manual Figure 25 Adding a DSL ATM interface for PPPoA service Step3 Choose WAN Service and click Add to display the following page.
  • Page 35 Ovislink OV504WN_User Manual Figure 26 WAN service interface configuration (PPPoA) Step4 Select the proper interface for the WAN service, and then click Next to display the following page.
  • Page 36 Ovislink OV504WN_User Manual Figure 27 WAN service configuration (PPPoA) Step5 In this page, you may modify the service description. Click Next to display the following page.
  • Page 37 Ovislink OV504WN_User Manual Figure 28 PPP username and password (PPPoA) Step6 In this page, you can enter the PPP username and PPP password provided by your ISP. Select the authentication method according to your requirement. After finishing setting, click Next to display the following page.
  • Page 38 Ovislink OV504WN_User Manual Figure 30 DNS server configuration (PPPoA) Step8 In this page, you can obtain the DNS server addresses from the selected WAN interface or manually enter the static DNS server addresses. If only a PVC with IPoA or static MER protocol is configured, you must enter the static DNS server addresses.
  • Page 39 Ovislink OV504WN_User Manual Figure 31 PPPoA summary Step9 In this page, it displays the information about the PPPoA settngs.Click Apply/Save to apply the settings, and then the following page appears. You can modify the settings by clicking the Back button if necessary.
  • Page 40 Ovislink OV504WN_User Manual Step1 Choose Advanced Setup > Layer2 Interface > ATM Interface to dsipaly the DSL ATM Interface Configuration page. In this page, you need to add a PVC for IPoA mode. Click the Add button in the DSL ATM Interface Configuration page to display the following page.
  • Page 41 Ovislink OV504WN_User Manual Figure 34 Adding a DSL ATM interface for IPoA service Step3 Choose WAN Service and click Add to display the following page.
  • Page 42 Ovislink OV504WN_User Manual Figure 35 WAN service interface configuration (IPoA) Step4 Select the proper interface for the WAN service ,and then click Next to display the following page.
  • Page 43 Ovislink OV504WN_User Manual Figure 36 WAN service configuration (IPoA) Step5 In this page, you may modify the service description. Click Next to display the following page. Figure 37 WAN IP settings (IPoA) Step6 In this page, enter the WAN IP address and the WAN subnet mask...
  • Page 44 Ovislink OV504WN_User Manual Figure 38 Network address translation settings (IPoA) In this page, Network Address Translation (NAT) allows you to share one Wide Area Network (WAN) IP address for multiple computers on your Local Area Network (LAN). If you do not want to enable NAT, and wish the user of modem to access the Internet normally, you need to add a route on the uplink equipment.
  • Page 45 Ovislink OV504WN_User Manual Figure 39 Routing-default gateway (IPoA) Step8 In this page, select a preferred WAN interface as the system default gateway and then click Next to display the following page.
  • Page 46 Ovislink OV504WN_User Manual Figure 40 DNS server configuration (IPoA) Step9 In this page, you should use a static DNS IP address for IPoA mode. Select the proper DNS server interface and enter the primary DNS server and the secondary DNS server. Click Next to display the following page.
  • Page 47 Ovislink OV504WN_User Manual Figure 42 Completing the settings of IPoA WAN service Adding a Bridge WAN service This section describes the steps for adding the br_0_0_40(Bridge mode) service. Step1 In the Wide Area Network (WAN) Service Setup page, click the Add button to display the following page.
  • Page 48 Ovislink OV504WN_User Manual Figure 43 WAN service interface configuration (bridge) Step2 Select the proper ATM Interface, for example atm6/(0_0_40) and then click Next to display the following page.
  • Page 49 Ovislink OV504WN_User Manual Figure 44 WAN service configuration (bridge) Step3 In this page, you can select the WAN service type, and modify the service description. After finishing setting, click Next to display the following page.
  • Page 50 Ovislink OV504WN_User Manual Figure 45 Bridge summary Step4 In this page, it displays the information about the bridge settngs. Click Apply/Save to save and apply the settings, and then the following page appears. You can modify the settings by clicking the Back button if...

  • Page 51: Lan Configuration

    Ovislink OV504WN_User Manual Figure 46 Completing the settings of bridge WAN service 5.2.3 LAN Configuration Choose Advanced Setup > LAN, and the following page appears. Figure 47 LAN setup...

  • Page 52: Enabling Igmp Snooping

    Ovislink OV504WN_User Manual In this page, you can configure an IP address for the DSL router, enable IGMP snooping, enable the LAN side firewall, enable or disable the DHCP server, edit the DHCP option, configure the DHCP advanced setup and set the binding between a MAC address and an IP address.

  • Page 53: Configuring The Dhcp Server

    Ovislink OV504WN_User Manual Figure 50 Setting the LAN side firewall In this page, you can enable or disable the LAN side firewall. Configuring the DHCP Server Figure 51 Setting the DHCP server If you enable the DHCP sever, the clients will automatically acquire the IP address from the DHCP server.
  • Page 54 Ovislink OV504WN_User Manual In this page, you can add, edit or delete the DHCP options, and these options will be sent to the DHCP client. Editing the DHCP Option60 Click the Edit DHCP Option60 button in the Local Area Network (LAN) Setup page to display the DHCP Option60 Setup page.

  • Page 55: Ipv6 Auto Configuration

    Ovislink OV504WN_User Manual Figure 55 Adding an entry of DHCP static IP lease list In this page, enter the MAC address of the LAN host and the static IP address that is reserved for the host, and then click the Apply/Save button to apply the settings.
  • Page 56 Ovislink OV504WN_User Manual In this page, you can set an IP address for the DSL IPv6 router, enable the DHCPv6 server, enable RADVD and enable the MLD snooping function. Enable DHCPv6 Server: WIDE-DHCPv6 is an open-source implementation of dynamic host configuration protocol for IPv6 (DHCPv6) originally developed by the KAME project.

  • Page 57: Nat

    Ovislink OV504WN_User Manual Enable MLD Snooping: Multicast Listener Discovery Snooping (MLD Snooping) is an IPv6 multicast constraining mechanism that runs on Layer 2 devices to manage and control IPv6 multicast groups. By analyzing received MLD messages, a Layer 2 device running MLD Snooping establishes mappings between ports and multicast MAC addresses and forwards IPv6 multicast data based on these mappings.
  • Page 58 Ovislink OV504WN_User Manual Figure 58 Adding an entry of virtual server Use interface: Select an interface that you want to configure. Select a Service: Select a proper service in the drop-down list. Custom Server: Enter a new service name to establish a user service type.

  • Page 59: Port Triggering

    Ovislink OV504WN_User Manual External Port End: When selecting a service, the port number will automatically be displayed. You can modify it if necessary. Protocol: You may select TCP/UDP, TCP, or UDP in the drop-down list. Internal Port Start: When selecting a service, the port number will automatically be displayed.
  • Page 60 Ovislink OV504WN_User Manual Figure 60 Adding an entry of port triggering Use interface: Select an interface that you want to configure. Select an application: Select a proper application in the drop-down list. Custom application: Manually define an application. Trigger port Start: The start port number that LAN uses to trigger the open port.

  • Page 61: Dmz Host

    Ovislink OV504WN_User Manual Note: You can use a single port number, several port numbers separated by commas, port blocks consisting of two port numbers separated by a dash, or any combination of these, for example 80, 90-140, 180. DMZ Host DMZ allows all the ports of a PC on your LAN to be exposed to the Internet.

  • Page 62: Wireless

    Ovislink OV504WN_User Manual Figure 62 Multi-NAT setup In this page, you can add or remove a multi-NAT rule. Click the Add button to display the following page. Figure 63 Adding a multi-NAT rule In this page, please select the proper type; select the proper Use interface, and configure the other parameters in this page.
  • Page 63 Ovislink OV504WN_User Manual Figure 64 Wireless basic configuration This page allows you to configure the basic features of the wireless LAN interface. Enable Wireless: Enable or disable the wireless function. Hide Access Point: if you want to hide any access point for your router, select this option, and then a station cannot obtain the SSID through the passive scanning.

  • Page 64: Security

    Ovislink OV504WN_User Manual Enable Wireless Multicast Forwarding (WMF): After enabling this option, the transmission quality of video service such as IPTV can be improved. SSID: For the security reason, you should change the default SSID to a unique name. BSSID: Display the MAC address of the wireless interface.
  • Page 65 Ovislink OV504WN_User Manual Figure 65 Wireless security configuration This page allows you to configure the security features of the wireless LAN interface. In this page, you can configure the network security settings by the Wi-Fi Protected Setup (WPS) method or setting the network authentication mode.
  • Page 66 Ovislink OV504WN_User Manual Figure 66 WPS setup There are 2 primary methods used in the Wi-Fi Protected Setup: - PIN entry, a mandatory method of setup for all WPS certified devices. - Push button configuration (PBC), an actual push button on the hardware or through a simulated push button in the software.

  • Page 67: Mac Filter

    Ovislink OV504WN_User Manual Figure 67 Manual setup AP 5.3.3 MAC Filter Choose Wireless > MAC Filter to display the following page. Figure 68 MAC filter configuration This page is used to allow or reject the wireless clients to access the wireless network...

  • Page 68: Wireless Bridge

    Ovislink OV504WN_User Manual of the wireless router. In this page, you can add or remove the MAC filters. The MAC restrict modes include Disabled, Allow, and Deny. Disabled: Disable the wireless MAC address filtering function. Allow: Allow the wireless clients with the MAC addresses in the MAC Address list to access the wireless network of the wireless router.

  • Page 69: Advanced Settings

    Ovislink OV504WN_User Manual Figure 70 Wireless bridge configuration This page allows you to configure the wireless bridge features of the wireless LAN interface. AP mode: you may select Access Point or Wireless Bridge. Bridge Restrict: Enable or disable the bridge restrict function.
  • Page 70 Ovislink OV504WN_User Manual Figure 71 Wireless advanced settings This page allows you to configure the advanced features of the wireless LAN interface. Usually, you do not need to change the settings in this page. Note: The advanced wireless setting is only for the advanced user. For the common user,...

  • Page 71: Diagnostics

    Ovislink OV504WN_User Manual 5.4 Diagnostics Choose Diagnostics, and the following page appears. Figure 72 Diagnostics configuration This page is used to test the connection to your local network, the connection to your DSL service provider, and the connection to your Internet service provider.

  • Page 72: Restore Default

    Ovislink OV504WN_User Manual Figure 73 Backup settings In this page, click the Backup Settings button to save your router’s settings to your local PC. Update Choose Management > Settings > Update, and the following page appears. Figure 74 Update settings In this page, click the Browse…...

  • Page 73: Client

    Ovislink OV504WN_User Manual In this page, click the Restore default settings button, and then system returns to the default settings. 5.5.2 TR-69 Client Choose Management > TR-069Client to display the following page. Figure 76 TR-069 client configuration WAN Management Protocol (TR-069) allows Auto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device.

  • Page 74: Access Control

    Ovislink OV504WN_User Manual 5.5.3 Access Control Passwords Choose Management > Access Control > Passwords, and the following page appears. Figure 77 Modifying the password In the page, you can modify the passwords of different users. After finishing setting, click the Apply/Save button to save and apply the settings.

  • Page 75: Update Software

    Ovislink OV504WN_User Manual Figure 78 Services control In this page, you can enable or disable the different types of services. After finishing setting, click the Apply/Save button to save and apply the settings. Note: The WAN information is not displayed in the bridge mode.

  • Page 76: Reboot

    Ovislink OV504WN_User Manual Figure 79 Updating software If you want to upload the software, click the Browse… button to choose the new software, and then click the Update Software button. Note: When software update is in progress, do not shut down the router. After software update completes, the router automatically reboots.
  • Page 77 Ovislink OV504WN_User Manual 6 Q&A (1) Q: Why all the indicators are off? A: Check the following: The connection between the power adaptor and the power socket. The status of the power switch. (2) Q: Why the LAN indicator is off?

Table of Contents