Using The Md Display - Sony CMT-J3MD Operating Instructions Manual

Programming MD tracks
(continued)
To check the programme order
Press . or > repeatedly during Programme
Play.
To
Cancel
Programme
Play
Add a track to
the programme
(in stop mode)
Erase the last
programmed
track
To select the desired track using
the number buttons
Press number buttons instead of performing steps
3 to 5.
To enter track numbers 10 or over, press >10
(press twice to enter 100 or over) and the track
number. To enter 0, use the 10/0 button.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press H.
• "Program Full !" appears when you try to
programme 26 or more tracks (steps).
• "---m--s" appears when the total MD programme
time exceeds 200 minutes.
30
Do this
Press x, then press PLAY MODE
repeatedly until "PGM" and
"SHUFFLE" disappear.
Do steps 3 and 4.
Press CLEAR in stop mode. Each
time you press the button, the last
programmed track is erased.

Using the MD display

You can check the total number of tracks, the total
playing time and the remaining time on the MD.
`/1
M
m
. >
H
X x
, Press DISPLAY.
Each time you press the button during
normal play or in stop mode, the display
changes as follows:
During normal play
t Elapsed playing time and the track
number on the current track
x
Remaining time and the track number on
the current track
x
Remaining time on the MD
x
Track title of the current track*
x
Clock
x
Effect name
* "No Name" appears when no track title is labelled.
DISPLAY