Erasing A Disc Title - Sony CHC-CL5MD Operating Instructions Manual

6
Press M.
The character you selected in step 4 stops
flashing and the cursor shifts to the right.
7
Repeat steps 4 and 5 to complete the
entire title.
If you made a mistake
Press m or M until the character you
want to change flashes, then repeat steps 4
and 5.
To erase a character
Press m or M until the cursor shifts to
the character you want to erase, then press
CLEAR on the remote while the character is
flashing. You cannot insert characters.
8
Press ENTER/YES to complete the
labelling procedure.
To cancel labelling
Press MENU/NO.
Checking the disc titles
1
Press MENU/NO in stop mode.
2
Turn ./> (or press . or > on
the remote) until "Name Check ?" appears,
then press ENTER/YES.
3
Turn ./> (or press . or > on
the remote) to select the disc titles stored in
the system memory between 01 and 50.
To check the current disc title
Press SCROLL on the remote in stop mode.

Erasing a disc title

1
Press MENU/NO in stop mode.
2
Turn ./> (or press . or > on
the remote) until "Name Erase ?" appears,
then press ENTER/YES.
3
Turn ./> (or press . or > on
the remote) to select the disc title you want
to erase.
The disc title appears scrolling in the display.
"No Name" appears if no disc title is
labelled.
4
Press ENTER/YES again.
"Complete!" appears.
To erase all disc titles, press . or >
repeatedly until "All Erase?" appears in step 2,
then press ENTER/YES twice.
To cancel erasing
Press MENU/NO during steps 1 to 3.
Note
To ensure that disc titles are not erased from memory,
have the system connected to mains power at least
once a month.
13