Accessories - Riello RLS 190/M MZ Installation, Use And Maintenance Instructions

ACCESSORIES

(optional):
• KIT FOR MODULATING OPERATION
Output power regulator kit RWF40
There are two components to order:
• the Output power regulator to install on the burner;
• the Probe to install on the heat generator
PARAMETER TO BE CHECKED
Temperature - 100...+500°C
Pressure
Output power regulator with signal 4-20 mA, 0-10V
There are two components to order:
• the Analogic signal converter;
• the Potentiometer
POTENTIOMETER
Type
ASZ...
• EXTENDED HEAD KIT
Standard length
Burner
RLS 190/M MZ
• SOUNDPROOFING BOX KIT
Burner
RLS 190/M MZ
• CONTINUOUS VENTILATION KIT
Burner
RLS 190/M MZ
• SPACER KIT
Spacer Thickness
Burner
RLS 190/M MZ
• GAS TRAINS IN COMPLIANCE WITH EN 676
Please refer to manual.
Important: the installer is responsible for the addition of any safety device not forseen in the present manual.
Range Type
PT 100
0...2.5 bar Output probe
0...16 bar 4...20 mA
0...25 bar 4...20 mA
ANALOGIC SIGNAL CONVERTER
Code Type
3010416 E5202
Lenght obtainable
(mm) with the kit (mm)
412 542
Box type Code
C4/5 3010404
Code
3010094
Code
(mm)
102 3000722
PROBE
Code
3010110
3010213
3010214
3090873
Code
3010415
Code
3010440
24
POWER REGULATOR
Type Code
RWF40 3010414