A Appendix - Accessories - Riello RS 68/EV ULX Installation, Use And Maintenance Instructions

A Appendix - Accessories
Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the
power to the heat request, ensuring a high level of stability for the
parameter controlled: temperature or pressure.
Parameter to be checked
Adjustment field
Temperature - 100 ÷ 500° C
Pressure
Soundproofing chamber kit
Burner
RS 68-200/EV ULX
Software interface kit (ACS410 + OCI410.30) - Service Level
Burner
RS 68-200/EV ULX
Modbus interface kit
Burner
RS 68-200/EV ULX
Continuous purging kit
Burner
RS 68-200/EV ULX
PVP kit (Pressure Valve Proving)
Burner
RS 68-200/EV ULX
Inverter kit (variable speed drive)
Burner
RS 68/EV ULX
RS 120/EV ULX
RS 160-200/EV ULX
Gas trains in compliance with EN 676
Please refer to manual.
The installer is responsible for the addition of any
safety device not foreseen in this manual.
ATTENZIONE
Appendix - Accessories
Type
PT 100
0 ÷ 2.5 bar 4 ÷ 20 mA
0 ÷ 16 bar 4 ÷ 20 mA
0 ÷ 25 bar 4 ÷ 20 mA
Type
C4/5
Code
3010436
Model Code
OCI412 3010437
Code
3010094
Code
3010344
Max. output (kW)
1.5
3.0
5.5
Two components should be ordered:
– the output power regulator to be installed on the burner;
– the probe to be installed on the heat generator.
Probe
Code
3010110
3010213
3010214
3090873
dB(A) Code
10 3010404
Code
20163060
20163064
20163071
65 GB
Output regulator
Type Code
RWF50 20099869
RWF55 20099905
20205886