Accessories - Riello RS 25/M BLU Installation, Use And Maintenance Instructions

ACCESSORIES

(optional):
• RADIO DISTURBANCEPROTECTION KIT
If the burner is installed in places particularly subject to radio disturbance (emission of signals exceeding 10 V/m) owing to the presence of an
INVERTER, or in applications where the length of the thermostat connections exceeds 20 metres, a protection kit is available as an interface
between the control box and the burner.
BURNER
Code
• LONG HEAD KIT
BURNER
Code
• KIT FOR LPG OPERATION: the kit allows the RS 25-35/M BLU burners to burn LPG.
BURNER
Output kW
Blast tube length mm
Code
• KIT FOR MODULATING OPERATION
OUTPUT POWER REGULATOR KIT RWF50
Two components should be ordered:
• the Output power regulator to install on the burner;
• the Probe to install on the heat generator
Parameter to control
Adjustment field
Temperature - 100...+500°C
0...2.5 bar
Pressure
0...16 bar
• POTENTIOMETER KIT FOR THE INDICATION
OF LOAD POSITION
• MAXIMUM GAS PRESSURE SWITCH
• KIT CLEAN CONTACTS
• KIT POST-PURGING
• GAS TRAINS TO COUPLE WITH THE BURNER, ACCORDING TO REGULATION EN 676 (complete with valves, pressure adjuster and filter): see page 9.
NOTE: The installer is responsible for the addition of any safety device not foreseen in this manual.
RS 25/M BLU - RS 35/M BLU
3010386
RS 25/M BLU
3010430
RS 25/M BLU
80/125 - 370 kW
230 - 365
3010423
Probe
Type Code
PT 100 3010110
RWF50.2
Output probe 3010213
RWF55.5
4...20 mA 3010214
Code 3010420
Code 3010418
Code 3010419
Code 3010451
2
RS 35/M BLU
3010431
RS 35/M BLU
120/200 - 470 kW
230 - 365
3010424
SIGNAL CONVERTER KIT 4-20 mA, 0-10V
Two components should be ordered:
• the Analogical signal converter;
• the Potentiometer
Output power
Potentiometer
regulator
Type Code Type
20083339
ASZ...
20098541
• KIT GROUND FAULT INTERRUPTER
• KIT CONTINUOUS PURGING
• KIT HOURCOUNTER
• KIT INTERFACE ADAPTER RMG TO PC
Analogical Signal
Converter
Code Type Code
3010420 E5202 3010410
Code 3010448
Code 3010449
Code 3010450
Code 3002719