Table of Contents
Advertisement
Available languages
Available languages
G2: Replace the blade with a new one.
Make sure that the blade is correctly
positioned on the support. Insert the shim
and tighten the screw slightly.
G3: Re-clamp the block so that the blade
can not rotate. Tighten the screw securely
with the wrench. Always use a torque
wrench (not included).
Storage (Image H)
The lawn mower needs to be stored dry and
clean in a closed room with good ventilation
out of the reach of children.
H1: Disconnect the device from the mains
and allow it to cool down. Remove the
grass basket.
H2: Loosen the wing nut and open the two
eccentric clamps of the upper handlebar.
Turn the handlebar down.
H3: Open the two eccentric clamps of the
lower handlebar. Turn the lower handlebar
forward.
H4: Place the grass basket on top of the
mower. This way the device can be stored
permanently.
CONFORMITY
We hereby declare on our sole and
exclusive responsibility that the models
LM3601E, LM3601ES
LM4001E, LM4001ES
manufactured in series by our facility,
comply with the following harmonized EU
guidelines and EU standards with regard to
safety and product-specific standards.
2006/42/EC, 2014/30/EC,
2000/14/EC Annex VI
Applied Standards:
EN 60335-1:2012 +A11:2014, EN 60335-2-
77:2010, EN 62233:2008, EN 55014-2:2015,
EN 55014-1:2006/+A1:2009/+A2:2011,
EN 61000-3-2:2014, EN 61000-3-11:2000,
ISO11094:1991, EN ISO3744:1995, Annex III
of 2000/14/EC as amended by 2005/88/EC
Guaranteed sound power level LwA,
96 dB(A)
Vibration
<2.5 m/s
Notified body:
Intertek Testing&Certification Ltd, Davy
Avenue, Knowlhill, Milton Keynes, MK5
8NL, No. 0359
Documents kept at the domicile of the
manufacturer: GRV Power Products, S.L.,
Av. Àlguema 6C, ES-17771 Girona
Spain importer:
GRV Power Products, S.L., Av. Àlguema
6C, ES-17771 Girona
Santa Llogaia d'Àlguema, 01.03.2017
------------------------
Xavier Soteras (Managing Director)
EN 16
2
Advertisement
Table of Contents
