Page 1
ZAVIO IR Speed Dome Quick Installation Guide...
Page 2
The following software and information are available online: - Video Management Software - Camera Installation Tool - User manuals - Camera Language Packs Download the above at http://www.zavio.com/downloads.php or scan QR-Code. To activate Video Management Software, please enter the license key below.
Page 3
Physical overview - Outer View - IR LED Lens Light sensor IR LED - Cable - Please use the supplied water proof RJ45 connector and seal all connectors tightly to avoid moisture.
Page 4
I/O Terminal Block Circuit I/O Terminal Block Pin Definition Definition Description Max. V/A Connected to GND to activate, or leave Alarm Input 1 30V DC floating (or unconnected) to deactivate. Connected to GND to activate, or leave Alarm Input 2 30V DC floating (or unconnected) to deactivate.
Page 5
e) Hook up the safety wire between the wall mount bracket and the camera. f) Connect power, RJ45 or I/O wires, and use foam tapes or seal foam to ensure the back-end connection is waterproof. g) Put all cables inside the wall mount and fix the following circled 3 screws. B.
Page 7
Before accessing the Setting page to change the language of the web interface, you must download the language pack. 1. Go to http://www.zavio.com/downloads.php and download the language pack corresponding to your IP camera model. 2. Go to the IP camera setting page and upload the preferred language from the language pack downloaded from step 1.
Need help?
Do you have a question about the P8220 and is the answer not in the manual?
Questions and answers