Rooms are too cold
Cause
Central heating is off.
Control unit incorrectly set.
Control unit fault:
"Fault" is displayed and the red fault indicator flashes
The heating circuit pump is not working.
Heating circuit with mixer: Mixer motor faulty
Rooms are too hot
Cause
Control unit incorrectly set.
Control unit fault or outside temperature sensor/boiler
water temperature sensor faulty:
"Fault" will be displayed; the red fault indicator flashes.
Heating circuit with mixer: Mixer motor faulty
Remedy
Check the settings and correct if required:
The heating circuit must be switched on (see
■
page 18)
Room temperature (see page 17)
■
Time (see page 36)
■
Switching times (see page 18)
■
Check the type of fault (see page 39) and notify your
heating contractor.
Contact your heating contractor.
Unhook motorised lever
lever
(to "5" for example).
B
Notify your heating contractor.
Remedy
Check the settings and correct if required:
The heating circuit must be on. See page 18.
■
Room temperature (see page 17)
■
Time (see page 36)
■
Switching times (see page 18)
■
Check the type of fault (see page 39) and notify your
heating contractor.
Unhook motorised lever
lever
(to "5" for example).
B
Notify your heating contractor.
What to do if...
and manually adjust mixer
A
and manually adjust mixer
A
43