Furuno SC-50 Operator's Manual page 2

Choosing Datum
1. Press the MENU key.
2. Choose GPS SETUP and then press the
ENT key.
SYSTEM SETUP
DATUM : WGS84
UNITS : kt
TIME DIFF : +00:00
TIME DISP : 24 HOUR
TEST?
DEMO : OFF
EXCHANGE BATTERY?
3. Choose DATUM and press the [ENT]
key.
4. Choose the Datum which you are
currently using and then press the ENT
key.
5. Press the DISP key to finish.
Satellite Status
1. Press the MENU key.
2. Choose SATELLITE and then press the
ENT key.
Position-
fixing
status
3D
N
07
06
02
Elevation 08
angle 5°
10
12
05
01
GPS1
Antenna
element
Elevation
no.
angle 45°
Satellite used in
fixing position
(white on black)
3. Use [left] or [right] arrow to choose
antenna element for which to confirm
receiving status.
4. Press the DISP key to finish.
All manuals and user guides at all-guides.com
North
RX signal
level
DOP
DOP 23
1. 5 14
18
- -
- -
- -
9
04 30
- -
- -
24
18
134
WAAS
2
Resetting Distance Run
1. Press the MENU key.
2. Choose TRIP MENU and then press the
ENT key.
3. Choose RESET DISTANCE and then
press the ENT key.
RESET DISTANCE?
ARE YOU SURE?
YES NO
4. Choose YES and then press the ENT
key.
5. Press the DISP key to finish.
Automatic DGPS Position
Fixes
1. Press the MENU key.
2. Choose WAAS/DGPS and then press
the ENT key.
WAAS/DGPS
MODE : GPS
WAAS SEARCH: AUTO 134
CORRECTIONS DATA SET: 00
DPGS STATION: AUTO
RATE: 000BPS
FREQ: 310.0kHz
STATION: GOOD DATA:GOOD
SIG. S: 55.2 dB SNR: 22.0 dB
3. MODE is selected; press the ENT key.
GPS
WAAS
DPGS
AUTO
4. Choose DGPS and then press the ENT
key.
5. Choose DGPS STATION and then press
the ENT key.
AUTO
MANUAL
6. Choose AUTO and then press the ENT
key.
7. Press the DISP key to finish.