Cardinal APS Setup And Operation Manual

Cardinal APS Setup And Operation Manual

Enterprise scale

Advertisement

8527-0544-2M Rev B
07/14
Technical Support: Ph: 866-254-8261  techsupport@cardet.com
ENTERPRISE SCALE
Setup and Operation Manual
CARDINAL SCALE MFG. CO.
PO BOX 151  WEBB CITY, MO 64870
PH (417) 673-4631  FAX (417) 673-5001
www.detectoscale.com
8527-0544-2M Rev B  APS Enterprise Scale
APS
Printed in USA
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the APS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cardinal APS

  • Page 1 CARDINAL SCALE MFG. CO. PO BOX 151  WEBB CITY, MO 64870 8527-0544-2M Rev B Printed in USA PH (417) 673-4631  FAX (417) 673-5001 07/14 www.detectoscale.com Technical Support: Ph: 866-254-8261  techsupport@cardet.com 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 2 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 3: Table Of Contents

    ERROR AND STATUS DISPLAYS ................ Page 10 REMOTE DISPLAY ....................Page 11 PARTS IDENTIFICATION ..................Page 12 (APS10, APS160, APS15, APS30, APS70 and APS150) ......... Page 12 (APS250) ......................Page 16 (APSRD – APS REMOTE DISPLAY) ..............Page 20 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 4 DATE OF PURCHASE ________________ Before using this scale, read this manual PURCHASED FROM _________________ and pay special attention to all ___________________________________ "NOTIFICATION" symbols: ___________________________________ ___________________________________ IMPORTANT ELECTRICAL RETAIN THIS INFORMATION FOR FUTURE USE WARNING 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 5: Introduction

    INTRODUCTION Thank you for selecting and purchasing the Detecto APS Enterprise Scale. It was built with Detecto quality and reliability at our factory in Webb City, Missouri and incorporates the latest in digital technology and innovative features for the weighing industry.
  • Page 6: Installation

    Once a level condition has been achieved, secure the mounting foot settings by tightening each of the lock nuts. Replace the platform on the weighbridge. LOCK NUT MOUNTING FOOT 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 7: Unpacking And Setup (Aps250)

    Once a level condition has been achieved, secure the mounting foot settings by tightening each of the lock nuts. Replace the platform on the weighbridge. 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 8: Electrical Power

    INSTALLATION, CONT. Electrical Power The APS Enterprise scale has been designed to operate from a 100 to 240 VAC 50/60Hz 12 VDC 1A wall plug-in UL/CSA listed AC power adapter. Note that a special order is not required for operation at 230 VAC.
  • Page 9: Data Cable Installation

    (refer to previous page) and then plug the power adapter into a proper electrical outlet. The scale is now ready for operation. 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 10: Keypad Functions

    DO NOT operate the keypad with pointed objects (pencils, pens, etc). Damage to keypad resulting from this practice is NOT covered under warranty. The keypad of the APS Enterprise Scale has two keys, ZERO (ON/OFF) and UNITS which have the following functions: This is the ZERO (ON/OFF) key.
  • Page 11: Setup And Configuration

    UNITS key again to save it. Otherwise, press the ZERO key to step through selections for a new value and then press the UNITS key to save it. Allowable values are 0 through 9. 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 12: Filter (Adjustable Digital Filtering)

    5. Starting at the right and proceeding left, a series of dashes will appear on the display and then starting at the left and proceeding right disappear. Next, the display will change to the PORT1 prompt. Calibration is complete. Proceed to PORT1. 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 13: Port1 (Serial Port 1)

    UNITS key again to save it. Otherwise, press the ZERO key to step through selections for a new value and then press the UNITS key to save it. Options for USB output format are the same as PORT1. 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 14: Hires (High Resolution Weight Mode)

    The High Resolution Weight Mode feature will display the weight at 10 times the standard resolution. For example, an APS configured for 250 lb x 0.1 lb will display weight in high resolution mode at 250 lb x 0.01 lb.
  • Page 15: Remote Display

    ® included velcro strips.  Using the remote display post, it can be mounted to a table, bench or in a retail environment, the checkstand. 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 16: Parts Identification

    LABEL, MADE IN USA (WITH FLAG) 1” X 1” 8527-D510-0A DISPLAY SUB-ASSY, 10 8527-D510-1A DISPLAY SUB-ASSY, 160 8527-D510-2A DISPLAY SUB-ASSY, 15 8527-D510-3A DISPLAY SUB-ASSY, 30 8527-D510-5A DISPLAY SUB-ASSY, 70 8527-D510-6A DISPLAY SUB-ASSY, 150 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 17 8527-0531-08 TOP PLATE, 30 8527-0532-08 TOP PLATE, 70 8527-0533-08 TOP PLATE, 150 8527-C503-08 BASE PLATE, 10 8527-C504-08 COVER, 6X10 8527-C505-08 PCB COVER 8527-C513-08 BASE PLATE, 160/15 8527-C514-08 COVER, 10X10 A/R = AS REQUIRED 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 18 PARTS IDENTIFICATION, CONT. (APS10, APS160, APS15, APS30, APS70 and APS150) 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 19 ITEM PART NO. DESCRIPTION 6021-0623 SCW PAN-HEAD.. MACHINE-SCW 06-32X.750 6021-1069 SCW CUP-POINT. SET-SCREW.. 10-32X.25 NYLON PATCH 6021-1706 SCW FLAT-HEAD. CAP-SCREW.. .25-20X.625 6680-0004 WASHER LOCK INT TOOTH #6 TYPE A Z-PL 8527-C500-0A ANALOG PCB 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 20: (Aps250)

    SCW FLAT-HEAD. MACHINE-SCW 06-32X1.00 6021-1069 SCW CUP-POINT. SET-SCREW.. 10-32X.25 NYLON PATCH 6021-1108 SCW FILLISTER. MACHINE-SCW 10-32X.375 6021-1706 SCW FLAT-HEAD. CAP-SCREW.. .25-20X.625 6650-0087 LABEL, MADE IN USA (WITH FLAG) 1” X 1” 8527-D510-7A DISPLAY SUB-ASSY, 250 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 21 PARTS IDENTIFICATION, CONT. (APS250) 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 22 LEVELLER SCREW, 3/8-16 X 1 1/4”, BLACK 6560-1072 A/R ADHESIVE, LOCTITE 49 6690-0001 BULLSEYE BUBBLE LEVEL 8527-0524-1A CABLE ASSY, 100KG LC 8527-0525-08 BASE PLATE, 250 8527-0526-08 COVER, 18X18 8527-0534-08 TOP PLATE, 250 8527-C505-08 PCB COVER A/R = AS REQUIRED 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 23 PARTS IDENTIFICATION, CONT. (APS250) ITEM PART NO. DESCRIPTION 6013-0315 NUT #6-32 HEX SMALL PATTERN Z/P 6021-1706 SCW FLAT-HEAD. CAP-SCREW.. .25-20X.625 6680-0004 WASHER LOCK INT TOOTH #6 TYPE A Z-PL 8527-C500-0A ANALOG PCB 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 24: (Apsrd - Aps Remote Display)

    (APSRD – APS REMOTE DISPLAY) ITEM PART NO. DESCRIPTION 5930-0146-08 CAPACITY LABEL 6021-2078 SCW PAN-HEAD PHILLIPS #1-32X3/8” THD FORM, SS 8527-0515-08 APS KEYPAD 8527-C502-4A PCB ASSY APSRD DISPLAY 8527-D506-08 ENCLOSURE FRONT 8527-D507-08 ENCLOSURE BACK 8527-D508-08 ENCLOSURE MOUNT 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 25 8527-0544-2M Rev B  APS Enterprise Scale...
  • Page 26 8527-0544-2M Rev B  APS Enterprise Scale...

Table of Contents